Include the RK817 PMIC in SPL and enable Kconfig options to power off
the handheld gaming device when it was powered on due to a power cable
plug-in event:
DDR3, 333MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
out
Power Off due to plug-in event
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 18 ++++++++++++++++++
configs/odroid-go2_defconfig | 3 +++
2 files changed, 21 insertions(+)
diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
index 6f40654d5e84..6c6efa964d80 100644
--- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
+++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
@@ -5,8 +5,26 @@
#include "rk3326-u-boot.dtsi"
+&i2c0_xfer {
+ bootph-pre-ram;
+};
+
+&i2s1_2ch_mclk {
+ bootph-pre-ram;
+};
+
+&pcfg_pull_none_smt {
+ bootph-pre-ram;
+};
+
+&pmic_int {
+ bootph-pre-ram;
+};
+
&rk817 {
regulators {
+ bootph-pre-ram;
+
vcc_cam: LDO_REG9 {
regulator-name = "vcc_cam";
regulator-min-microvolt = <3000000>;
diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig
index b0947fe2c8b2..a6d02baa520f 100644
--- a/configs/odroid-go2_defconfig
+++ b/configs/odroid-go2_defconfig
@@ -8,6 +8,7 @@ CONFIG_ENV_OFFSET=0x4000
CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3326-odroid-go2"
CONFIG_DM_RESET=y
CONFIG_ROCKCHIP_PX30=y
+CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
CONFIG_TARGET_ODROID_GO2=y
CONFIG_DEBUG_UART_CHANNEL=1
CONFIG_SYS_LOAD_ADDR=0x800800
@@ -42,6 +43,7 @@ CONFIG_CMD_GPT=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_ITEST is not set
@@ -73,6 +75,7 @@ CONFIG_SPL_PINCTRL=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_SPL_PMIC_RK8XX=y
+CONFIG_SPL_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
--
2.49.0
