On Wed, Jul 16, 2025 at 09:37:08AM +0200, Christian Marangi wrote:
> There are multiple version of the same reference board with different
> RAM size and it's not enough to base the RAM size entirely from DT. To
> better support it use the get_ram_size way to scan for the actual RAM
> size of Airoha SoC and increase the size of the memory map.
>
> Signed-off-by: Christian Marangi <ansuels...@gmail.com>
Sorry ignore this as it was sent by mistake, I resent a new version of
the same patch that actually apply and build.
> ---
> arch/arm/mach-airoha/an7581/init.c | 22 ++++++++++++++++++----
> arch/arm/mach-airoha/an7583/init.c | 22 ++++++++++++++++++----
> 2 files changed, 36 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/mach-airoha/an7581/init.c
> b/arch/arm/mach-airoha/an7581/init.c
> index cefe9c6db9e..caf1006b22b 100644
> --- a/arch/arm/mach-airoha/an7581/init.c
> +++ b/arch/arm/mach-airoha/an7581/init.c
> @@ -3,8 +3,11 @@
> #include <fdtdec.h>
> #include <init.h>
> #include <asm/armv8/mmu.h>
> +#include <asm/global_data.h>
> #include <asm/system.h>
>
> +DECLARE_GLOBAL_DATA_PTR;
> +
> int print_cpuinfo(void)
> {
> printf("CPU: Airoha AN7581\n");
> @@ -13,12 +16,23 @@ int print_cpuinfo(void)
>
> int dram_init(void)
> {
> - return fdtdec_setup_mem_size_base();
> + int ret;
> +
> + ret = fdtdec_setup_mem_size_base();
> + if (ret)
> + return ret;
> +
> + gd->ram_size = get_ram_size((void *)gd->ram_base, SZ_8G);
> +
> + return 0;
> }
>
> int dram_init_banksize(void)
> {
> - return fdtdec_setup_memory_banksize();
> + gd->bd->bi_dram[0].start = gd->ram_base;
> + gd->bd->bi_dram[0].size = gd->ram_size;
> +
> + return 0;
> }
>
> void reset_cpu(ulong addr)
> @@ -31,12 +45,12 @@ static struct mm_region an7581_mem_map[] = {
> /* DDR */
> .virt = 0x80000000UL,
> .phys = 0x80000000UL,
> - .size = 0x80000000UL,
> + .size = 0x200000000ULL,
> .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
> }, {
> .virt = 0x00000000UL,
> .phys = 0x00000000UL,
> - .size = 0x20000000UL,
> + .size = 0x40000000UL,
> .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> PTE_BLOCK_NON_SHARE |
> PTE_BLOCK_PXN | PTE_BLOCK_UXN
> diff --git a/arch/arm/mach-airoha/an7583/init.c
> b/arch/arm/mach-airoha/an7583/init.c
> index 77c29290331..c00837b4234 100644
> --- a/arch/arm/mach-airoha/an7583/init.c
> +++ b/arch/arm/mach-airoha/an7583/init.c
> @@ -4,6 +4,9 @@
> #include <init.h>
> #include <asm/armv8/mmu.h>
> #include <asm/system.h>
> +#include <asm/global_data.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
>
> int print_cpuinfo(void)
> {
> @@ -13,12 +16,23 @@ int print_cpuinfo(void)
>
> int dram_init(void)
> {
> - return fdtdec_setup_mem_size_base();
> + int ret;
> +
> + ret = fdtdec_setup_mem_size_base();
> + if (ret)
> + return ret;
> +
> + gd->ram_size = get_ram_size((void *)gd->ram_base, SZ_8G);
> +
> + return 0;
> }
>
> int dram_init_banksize(void)
> {
> - return fdtdec_setup_memory_banksize();
> + gd->bd->bi_dram[0].start = gd->ram_base;
> + gd->bd->bi_dram[0].size = gd->ram_size;
> +
> + return 0;
> }
>
> void reset_cpu(ulong addr)
> @@ -31,12 +45,12 @@ static struct mm_region an7583_mem_map[] = {
> /* DDR */
> .virt = 0x80000000UL,
> .phys = 0x80000000UL,
> - .size = 0x80000000UL,
> + .size = 0x200000000ULL,
> .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
> }, {
> .virt = 0x00000000UL,
> .phys = 0x00000000UL,
> - .size = 0x20000000UL,
> + .size = 0x40000000UL,
> .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> PTE_BLOCK_NON_SHARE |
> PTE_BLOCK_PXN | PTE_BLOCK_UXN
> --
> 2.48.1
>
--
Ansuel
