[PATCH] ddr: fsl: Provide initial value for zqcs_init

[Andrew Goodbody]

In the case of !zq_en zqcs_init is never assigned to although its value
is used. Correct by initialising zqcs_init to 0.

This issue was found by Smatch.

Signed-off-by: Andrew Goodbody <andrew.goodb...@linaro.org>
---
 drivers/ddr/fsl/ctrl_regs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
index 9a25192c079..fea08c9000f 100644
--- a/drivers/ddr/fsl/ctrl_regs.c
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -2173,7 +2173,7 @@ static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr, 
unsigned int zq_en)
        /* Normal Operation Short Calibration Time (tZQCS) */
        unsigned int zqcs = 0;
 #ifdef CONFIG_SYS_FSL_DDR4
-       unsigned int zqcs_init;
+       unsigned int zqcs_init = 0;
 #endif
 
        if (zq_en) {

---
base-commit: 3532f1f5edfc97c9dcea723cdeb732eda44bc669
change-id: 20250724-ddr_fsl-ca67a96e5a50

Best regards,
-- 
Andrew Goodbody <andrew.goodb...@linaro.org>