[PATCH 2/2] mmc: gen_atmel_mci: NULL check variable before use

[Andrew Goodbody]

In mci_send_cmd the pointer 'data' is optional so guard its use with a
NULL check to prevent any attempt to dereference it when not provided.

This issue was found by Smatch.

Signed-off-by: Andrew Goodbody <andrew.goodb...@linaro.org>
---
 drivers/mmc/gen_atmel_mci.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c
index 62aa6b3cb0b..838b4f4a65a 100644
--- a/drivers/mmc/gen_atmel_mci.c
+++ b/drivers/mmc/gen_atmel_mci.c
@@ -263,13 +263,15 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct 
mmc_data *data)
        /* Figure out the transfer arguments */
        cmdr = mci_encode_cmd(cmd, data, &error_flags);
 
-       mci_set_blklen(mci, data->blocksize);
+       if (data) {
+               mci_set_blklen(mci, data->blocksize);
 
-       /* For multi blocks read/write, set the block register */
-       if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK)
-                       || (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK))
-               writel(data->blocks | MMCI_BF(BLKLEN, data->blocksize),
-                      &mci->blkr);
+               /* For multi blocks read/write, set the block register */
+               if (cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK ||
+                   cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)
+                       writel(data->blocks | MMCI_BF(BLKLEN, data->blocksize),
+                              &mci->blkr);
+       }
 
        /* Send the command */
        writel(cmd->cmdarg, &mci->argr);

-- 
2.39.5