[PATCH] mmc: owl_mmc: Do not dereference data before NULL check

[Andrew Goodbody]

In owl_mmc_prepare_data there is a NULL check for the pointer data but
it happens after data has already been dereferenced. Refactor the code
so that the NULL check happens before any code dereferences data.

This issue was found by Smatch.

Signed-off-by: Andrew Goodbody <andrew.goodb...@linaro.org>
---
 drivers/mmc/owl_mmc.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/mmc/owl_mmc.c b/drivers/mmc/owl_mmc.c
index bd4906f58e7..c18807b1f49 100644
--- a/drivers/mmc/owl_mmc.c
+++ b/drivers/mmc/owl_mmc.c
@@ -135,19 +135,19 @@ static void owl_mmc_prepare_data(struct owl_mmc_priv 
*priv,
 
        setbits_le32(priv->reg_base + OWL_REG_SD_EN, OWL_SD_EN_BSEL);
 
-       writel(data->blocks, priv->reg_base + OWL_REG_SD_BLK_NUM);
-       writel(data->blocksize, priv->reg_base + OWL_REG_SD_BLK_SIZE);
-       total = data->blocksize * data->blocks;
-
-       if (total < 512)
-               writel(total, priv->reg_base + OWL_REG_SD_BUF_SIZE);
-       else
-               writel(512, priv->reg_base + OWL_REG_SD_BUF_SIZE);
-
        /* DMA STOP */
        writel(0x0, SD_DMA_CHANNEL(priv->dma_channel, 0) + DMA_START);
 
        if (data) {
+               writel(data->blocks, priv->reg_base + OWL_REG_SD_BLK_NUM);
+               writel(data->blocksize, priv->reg_base + OWL_REG_SD_BLK_SIZE);
+               total = data->blocksize * data->blocks;
+
+               if (total < 512)
+                       writel(total, priv->reg_base + OWL_REG_SD_BUF_SIZE);
+               else
+                       writel(512, priv->reg_base + OWL_REG_SD_BUF_SIZE);
+
                if (data->flags == MMC_DATA_READ) {
                        buf = (ulong) (data->dest);
                        owl_dma_config(priv, (ulong) priv->reg_base +

---
base-commit: 79f3e77133bd7248e4579827effc13f97a32a8a8
change-id: 20250731-owl_mmc-ef16e32b68fd

Best regards,
-- 
Andrew Goodbody <andrew.goodb...@linaro.org>