在 2025-08-06星期三的 19:24 +0200，Paul Kocialkowski写道：
> Hi,
>
> Le Wed 06 Aug 25, 01:21, Andre Przywara a écrit :
> > On Tue, 5 Aug 2025 19:48:18 +0200
> > Paul Kocialkowski <pa...@sys-base.io> wrote:
> >
> > Hi Paul,
> >
> > > From: Paul Kocialkowski <cont...@paulk.fr>
> > >
> > > There are a few notable differences that are relevant to U-Boot,
> > > including:
> > > - different DRAM configuration due to the co-packaged DRAM chip
> > > in V3s;
> > > - use of an external PMIC (typically an AXP209) on V3;
> > > - extra pins available on V3, e.g. for UART1.
> >
> > Mmmh, to be honest I am not really convinced this is useful. The
> > patch
> > below looks roughly like a big s/MACH_SUN8I_V3S/MACH_SUN8I_V3_V3S/,
> > which I am not sure is really worth it. We had not super accurate
> > names
> > before, after all those are just marketing names that Allwinner
> > once
> > came up with. So we use MACH_SUN55I_A523, even though it's mostly
> > A527 or T527 chips, really, for instance.
>
> Yes I think this case is a bit different because there is actually a
> difference
> not just in the packaging and pins available but also because a dram
> die is
> co-packaged with the sun8i chip.
>
> > For the three actually differing items you mention above: I think
> > we
> > can treat the DRAM and external PMIC like board options, and could
> > describe the extra pins either unconditionally or drop them at all
> > (see
> > my comment there).
> >
> > What do you think? Is that distinction on the Kconfig level really
> > necessary?
>
> I think it is preferable because the DRAM die co-packaged with the
> chip is
> definitely not a board-specific choice, so I would rather see the
> DRAM-related
> details handled by the common Kconfig rather than duplicated over
> each V3s
> board.
I think we have a similar case here -- F1C100s vs F1C200s, copackaged
32M or 64M DRAM.
Existing F1C200s board (LcTech Pi) just overrides SUNXI_MINIMUM_DRAM_MB
in defconfig.
>
> For the PMIC it mostly remains a board-specific option and is not
> enabled by
> default anyway, it's just the defaults that are updated. Apparently
> there are
> designs with V3s that use an AXP209 PMIC so the defaults could
> actually go
> to the common option.
Allwinner suggests V3s to be used with PMIC, it's just Sipeed being
crazy here to make a pill-sized board (and omitted PMIC as a tradeoff).
>
> Another approach here could be to keep a single MACH_SUN8I_V3 option
> and have
> an extra one to select the co-packaged DRAM that only V3s boards
> would select
> in their config. If it's the rename that bothers you we could keep
> the
> MACH_SUN8I_V3S name but I think it would be significantly more
> confusing.
>
> What do you think?
>
> Paul
>
> > Cheers,
> > Andre
> >
> > > Move the exiting V3s config to a common option and introduce
> > > specific options
> > > for V3s and V3 to set specific aspects and reflect this all round
> > > the tree.
> > >
> > > Also update the pinecube config to reflect the updated defaults.
> > >
> > > Signed-off-by: Paul Kocialkowski <cont...@paulk.fr>
> > > ---
> > > arch/arm/dts/Makefile | 2 +-
> > > arch/arm/include/asm/arch-sunxi/cpu.h | 2 +-
> > > arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 2 +-
> > > arch/arm/mach-sunxi/Kconfig | 41 +++++++++++++--
> > > ------
> > > arch/arm/mach-sunxi/board.c | 2 +-
> > > arch/arm/mach-sunxi/cpu_info.c | 2 +
> > > arch/arm/mach-sunxi/dram_sunxi_dw.c | 18 ++++-----
> > > arch/arm/mach-sunxi/spl_spi_sunxi.c | 2 +-
> > > board/sunxi/board.c | 2 +-
> > > configs/pinecube_defconfig | 3 +-
> > > drivers/clk/sunxi/Kconfig | 2 +-
> > > drivers/phy/allwinner/Kconfig | 2 +-
> > > drivers/pinctrl/sunxi/Kconfig | 2 +-
> > > drivers/power/Kconfig | 2 +-
> > > 14 files changed, 47 insertions(+), 37 deletions(-)
> > >
> > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > > index 0dc7e190eb93..3d93679058c8 100644
> > > --- a/arch/arm/dts/Makefile
> > > +++ b/arch/arm/dts/Makefile
> > > @@ -646,7 +646,7 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \
> > > sun8i-r40-oka40i-c.dtb \
> > > sun8i-t3-cqa3t-bv3.dtb \
> > > sun8i-v40-bananapi-m2-berry.dtb
> > > -dtb-$(CONFIG_MACH_SUN8I_V3S) += \
> > > +dtb-$(CONFIG_MACH_SUN8I_V3_V3S) += \
> > > sun8i-s3-elimo-initium.dtb \
> > > sun8i-s3-pinecube.dtb \
> > > sun8i-v3-sl631-imx179.dtb \
> > > diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h
> > > b/arch/arm/include/asm/arch-sunxi/cpu.h
> > > index 768c6572d6b7..bd9dd97b890b 100644
> > > --- a/arch/arm/include/asm/arch-sunxi/cpu.h
> > > +++ b/arch/arm/include/asm/arch-sunxi/cpu.h
> > > @@ -18,7 +18,7 @@
> > >
> > > #define SOCID_A64 0x1689
> > > #define SOCID_H3 0x1680
> > > -#define SOCID_V3S 0x1681
> > > +#define SOCID_V3_V3S 0x1681
> > > #define SOCID_H5 0x1718
> > > #define SOCID_R40 0x1701
> > >
> > > diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
> > > b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
> > > index f023a4cfd934..3212b818286c 100644
> > > --- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
> > > +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
> > > @@ -13,7 +13,7 @@
> > >
> > > #if defined(CONFIG_SUNXI_GEN_SUN6I) && \
> > > !defined(CONFIG_MACH_SUN8I_R40) && \
> > > - !defined(CONFIG_MACH_SUN8I_V3S)
> > > + !defined(CONFIG_MACH_SUN8I_V3_V3S)
> > > #define SUNXI_SRAM_A2_BASE 0x00040000
> > > #ifdef CONFIG_MACH_SUN8I_H3
> > > #define SUNXI_SRAM_A2_SIZE (48 * 1024) /* 16+32
> > > kiB */
> > > diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-
> > > sunxi/Kconfig
> > > index 5a696095586e..f0faa9f80a23 100644
> > > --- a/arch/arm/mach-sunxi/Kconfig
> > > +++ b/arch/arm/mach-sunxi/Kconfig
> > > @@ -476,17 +476,13 @@ config MACH_SUN8I_R528
> > > select SUPPORT_SPL
> > > select DRAM_SUN20I_D1
> > >
> > > +config MACH_SUN8I_V3
> > > + bool "sun8i (Allwinner V3/S3/S3L)"
> > > + select MACH_SUN8I_V3_V3S
> > > +
> > > config MACH_SUN8I_V3S
> > > - bool "sun8i (Allwinner V3/V3s/S3/S3L)"
> > > - select CPU_V7A
> > > - select CPU_V7_HAS_NONSEC
> > > - select CPU_V7_HAS_VIRT
> > > - select ARCH_SUPPORT_PSCI
> > > - select SUNXI_GEN_SUN6I
> > > - select SUNXI_DRAM_DW
> > > - select SUNXI_DRAM_DW_16BIT
> > > - select SUPPORT_SPL
> > > - select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
> > > + bool "sun8i (Allwinner V3s)"
> > > + select MACH_SUN8I_V3_V3S
> > >
> > > config MACH_SUN9I
> > > bool "sun9i (Allwinner A80)"
> > > @@ -562,7 +558,20 @@ config MACH_SUN8I
> > > default y if MACH_SUN8I_A83T
> > > default y if MACH_SUNXI_H3_H5
> > > default y if MACH_SUN8I_R40
> > > - default y if MACH_SUN8I_V3S
> > > + default y if MACH_SUN8I_V3_V3S
> > > +
> > > +config MACH_SUN8I_V3_V3S
> > > + bool "sun8i (Allwinner V3/V3s/S3/S3L)"
> > > + depends on MACH_SUN8I_V3 || MACH_SUN8I_V3S
> > > + select CPU_V7A
> > > + select CPU_V7_HAS_NONSEC
> > > + select CPU_V7_HAS_VIRT
> > > + select ARCH_SUPPORT_PSCI
> > > + select SUNXI_GEN_SUN6I
> > > + select SUNXI_DRAM_DW
> > > + select SUNXI_DRAM_DW_16BIT
> > > + select SUPPORT_SPL
> > > + select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
> > >
> > > config RESERVE_ALLWINNER_BOOT0_HEADER
> > > bool "reserve space for Allwinner boot0 header"
> > > @@ -719,7 +728,7 @@ config DRAM_CLK
> > > default 792 if MACH_SUN9I
> > > default 648 if MACH_SUN8I_R40
> > > default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I ||
> > > \
> > > - MACH_SUN8I_V3S
> > > + MACH_SUN8I_V3_V3S
> > > default 312 if MACH_SUN6I || MACH_SUN8I
> > > default 672 if MACH_SUN50I
> > > default 744 if MACH_SUN50I_H6
> > > @@ -747,7 +756,7 @@ config DRAM_ZQ
> > > default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I ||
> > > \
> > > MACH_SUN8I_A23 || MACH_SUN8I_A33 ||
> > > MACH_SUN8I_A83T
> > > default 127 if MACH_SUN7I
> > > - default 14779 if MACH_SUN8I_V3S
> > > + default 14779 if MACH_SUN8I_V3_V3S
> > > default 3881979 if MACH_SUNXI_H3_H5 || MACH_SUN8I_R40 ||
> > > MACH_SUN50I_H6
> > > default 4145117 if MACH_SUN9I
> > > default 3881915 if MACH_SUN50I
> > > @@ -877,7 +886,7 @@ config SYS_SOC
> > > config SUNXI_MINIMUM_DRAM_MB
> > > int "minimum DRAM size"
> > > default 32 if MACH_SUNIV
> > > - default 64 if MACH_SUN8I_V3S
> > > + default 64 if MACH_SUN8I_V3_V3S
> > > default 256
> > > ---help---
> > > Minimum DRAM size expected on the board. Traditionally we
> > > assumed
> > > @@ -963,7 +972,7 @@ config VIDEO_SUNXI
> > > depends on !MACH_SUN8I_A83T
> > > depends on !MACH_SUNXI_H3_H5
> > > depends on !MACH_SUN8I_R40
> > > - depends on !MACH_SUN8I_V3S
> > > + depends on !MACH_SUN8I_V3_V3S
> > > depends on !MACH_SUN9I
> > > depends on !MACH_SUN50I
> > > depends on !SUN50I_GEN_H6
> > > @@ -1186,7 +1195,7 @@ config SPL_STACK_R_ADDR
> > >
> > > config SPL_SPI_SUNXI
> > > bool "Support for SPI Flash on Allwinner SoCs in SPL"
> > > - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I ||
> > > MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 ||
> > > MACH_SUN8I_V3S || SUN50I_GEN_H6 || MACH_SUNIV || SUNXI_GEN_NCAT2
> > > + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I ||
> > > MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 ||
> > > MACH_SUN8I_V3_V3S || SUN50I_GEN_H6 || MACH_SUNIV ||
> > > SUNXI_GEN_NCAT2
> > > help
> > > Enable support for SPI Flash. This option allows SPL to
> > > read from
> > > sunxi SPI Flash. It uses the same method as the boot
> > > ROM, so does
> > > diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-
> > > sunxi/board.c
> > > index fb4837c2082d..a1a02b0fae50 100644
> > > --- a/arch/arm/mach-sunxi/board.c
> > > +++ b/arch/arm/mach-sunxi/board.c
> > > @@ -149,7 +149,7 @@ static int gpio_init(void)
> > > sunxi_gpio_set_cfgpin(SUNXI_GPB(9),
> > > SUN8I_A83T_GPB_UART0);
> > > sunxi_gpio_set_cfgpin(SUNXI_GPB(10),
> > > SUN8I_A83T_GPB_UART0);
> > > sunxi_gpio_set_pull(SUNXI_GPB(10), SUNXI_GPIO_PULL_UP);
> > > -#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_V3S)
> > > +#elif CONFIG_CONS_INDEX == 1 &&
> > > defined(CONFIG_MACH_SUN8I_V3_V3S)
> > > sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN8I_V3S_GPB_UART0);
> > > sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_V3S_GPB_UART0);
> > > sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP);
> > > diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-
> > > sunxi/cpu_info.c
> > > index c3a51d9956ec..5b03dcdc354d 100644
> > > --- a/arch/arm/mach-sunxi/cpu_info.c
> > > +++ b/arch/arm/mach-sunxi/cpu_info.c
> > > @@ -90,6 +90,8 @@ int print_cpuinfo(void)
> > > printf("CPU: Allwinner H3 (SUN8I %04x)\n",
> > > sunxi_get_sram_id());
> > > #elif defined CONFIG_MACH_SUN8I_R40
> > > printf("CPU: Allwinner R40 (SUN8I %04x)\n",
> > > sunxi_get_sram_id());
> > > +#elif defined CONFIG_MACH_SUN8I_V3
> > > + printf("CPU: Allwinner V3/S3/S3L (SUN8I %04x)\n",
> > > sunxi_get_sram_id());
> > > #elif defined CONFIG_MACH_SUN8I_V3S
> > > printf("CPU: Allwinner V3s (SUN8I %04x)\n",
> > > sunxi_get_sram_id());
> > > #elif defined CONFIG_MACH_SUN8I_R528
> > > diff --git a/arch/arm/mach-sunxi/dram_sunxi_dw.c b/arch/arm/mach-
> > > sunxi/dram_sunxi_dw.c
> > > index 4ed295909ceb..56d03027b933 100644
> > > --- a/arch/arm/mach-sunxi/dram_sunxi_dw.c
> > > +++ b/arch/arm/mach-sunxi/dram_sunxi_dw.c
> > > @@ -254,7 +254,7 @@ static void mctl_set_master_priority(uint16_t
> > > socid)
> > > case SOCID_H3:
> > > mctl_set_master_priority_h3();
> > > return;
> > > - case SOCID_V3S:
> > > + case SOCID_V3_V3S:
> > > mctl_set_master_priority_v3s();
> > > return;
> > > case SOCID_A64:
> > > @@ -445,7 +445,7 @@ static void mctl_sys_init(uint16_t socid,
> > > struct dram_para *para)
> > > CCM_DRAMCLK_CFG_DIV(1) |
> > > CCM_DRAMCLK_CFG_SRC_PLL11 |
> > > CCM_DRAMCLK_CFG_UPD);
> > > - } else if (socid == SOCID_H3 || socid == SOCID_H5 ||
> > > socid == SOCID_V3S) {
> > > + } else if (socid == SOCID_H3 || socid == SOCID_H5 ||
> > > socid == SOCID_V3_V3S) {
> > > clock_set_pll5(CONFIG_DRAM_CLK * 2 * 1000000,
> > > false);
> > > clrsetbits_le32(&ccm->dram_clk_cfg,
> > > CCM_DRAMCLK_CFG_DIV_MASK |
> > > @@ -528,7 +528,7 @@ static int mctl_channel_init(uint16_t socid,
> > > struct dram_para *para)
> > > /* dphy & aphy phase select 270 degree */
> > > clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) |
> > > (0x3 << 8),
> > > (0x1 << 10) | (0x2 << 8));
> > > - } else if (socid == SOCID_V3S) {
> > > + } else if (socid == SOCID_V3_V3S) {
> > > /* dx ddr_clk & hdr_clk dynamic mode */
> > > clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) |
> > > (0x3 << 12));
> > >
> > > @@ -567,7 +567,7 @@ static int mctl_channel_init(uint16_t socid,
> > > struct dram_para *para)
> > > mctl_set_bit_delays(para);
> > > udelay(50);
> > >
> > > - if (socid == SOCID_V3S) {
> > > + if (socid == SOCID_V3_V3S) {
> > > mctl_v3s_zq_calibration_quirk(para);
> > >
> > > mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST
> > > |
> > > @@ -636,7 +636,7 @@ static int mctl_channel_init(uint16_t socid,
> > > struct dram_para *para)
> > > udelay(10);
> > >
> > > /* set PGCR3, CKE polarity */
> > > - if (socid == SOCID_H3 || socid == SOCID_V3S)
> > > + if (socid == SOCID_H3 || socid == SOCID_V3_V3S)
> > > writel(0x00aa0060, &mctl_ctl->pgcr[3]);
> > > else if (socid == SOCID_A64 || socid == SOCID_H5 || socid
> > > == SOCID_R40)
> > > writel(0xc0aa0060, &mctl_ctl->pgcr[3]);
> > > @@ -758,7 +758,7 @@ static void
> > > mctl_auto_detect_dram_size(uint16_t socid, struct dram_para
> > > *para)
> > > 0, 0, 0, 0, 0, 0, 0, 0, \
> > > 0, 0, 0, 0, 0, 0, 0 }
> > >
> > > -#define
> > > SUN8I_V3S_DX_READ_DELAYS \
> > > +#define SUN8I_V3S_DX_READ_DELAYS \
> > > {{ 8, 8, 8, 8, 8, 8, 8, 8, 8, 0, 0 }, \
> > > { 7, 7, 7, 7, 7, 7, 7, 7, 7, 0, 0 }, \
> > > { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
> > > @@ -851,7 +851,7 @@ unsigned long sunxi_dram_init(void)
> > > .dx_read_delays = SUN8I_H3_DX_READ_DELAYS,
> > > .dx_write_delays = SUN8I_H3_DX_WRITE_DELAYS,
> > > .ac_delays = SUN8I_H3_AC_DELAYS,
> > > -#elif defined(CONFIG_MACH_SUN8I_V3S)
> > > +#elif defined(CONFIG_MACH_SUN8I_V3_V3S)
> > > .dx_read_delays = SUN8I_V3S_DX_READ_DELAYS,
> > > .dx_write_delays = SUN8I_V3S_DX_WRITE_DELAYS,
> > > .ac_delays = SUN8I_V3S_AC_DELAYS,
> > > @@ -878,8 +878,8 @@ unsigned long sunxi_dram_init(void)
> > > uint16_t socid = SOCID_H3;
> > > #elif defined(CONFIG_MACH_SUN8I_R40)
> > > uint16_t socid = SOCID_R40;
> > > -#elif defined(CONFIG_MACH_SUN8I_V3S)
> > > - uint16_t socid = SOCID_V3S;
> > > +#elif defined(CONFIG_MACH_SUN8I_V3_V3S)
> > > + uint16_t socid = SOCID_V3_V3S;
> > > #elif defined(CONFIG_MACH_SUN50I)
> > > uint16_t socid = SOCID_A64;
> > > #elif defined(CONFIG_MACH_SUN50I_H5)
> > > diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-
> > > sunxi/spl_spi_sunxi.c
> > > index 5f72e809952b..f6650652b42a 100644
> > > --- a/arch/arm/mach-sunxi/spl_spi_sunxi.c
> > > +++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c
> > > @@ -141,7 +141,7 @@ static bool is_sun6i_gen_spi(void)
> > > return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ||
> > > IS_ENABLED(CONFIG_SUN50I_GEN_H6) ||
> > > IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2) ||
> > > - IS_ENABLED(CONFIG_MACH_SUN8I_V3S);
> > > + IS_ENABLED(CONFIG_MACH_SUN8I_V3_V3S);
> > > }
> > >
> > > static uintptr_t spi0_base_address(void)
> > > diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> > > index 2929bc17f084..6520636ffab5 100644
> > > --- a/board/sunxi/board.c
> > > +++ b/board/sunxi/board.c
> > > @@ -68,7 +68,7 @@ void i2c_init_board(void)
> > > sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0);
> > > sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0);
> > > clock_twi_onoff(0, 1);
> > > -#elif defined(CONFIG_MACH_SUN8I_V3S)
> > > +#elif defined(CONFIG_MACH_SUN8I_V3_V3S)
> > > sunxi_gpio_set_cfgpin(SUNXI_GPB(6), SUN8I_V3S_GPB_TWI0);
> > > sunxi_gpio_set_cfgpin(SUNXI_GPB(7), SUN8I_V3S_GPB_TWI0);
> > > clock_twi_onoff(0, 1);
> > > diff --git a/configs/pinecube_defconfig
> > > b/configs/pinecube_defconfig
> > > index 7567a6aa7394..088dd6f8630a 100644
> > > --- a/configs/pinecube_defconfig
> > > +++ b/configs/pinecube_defconfig
> > > @@ -2,8 +2,7 @@ CONFIG_ARM=y
> > > CONFIG_ARCH_SUNXI=y
> > > CONFIG_DEFAULT_DEVICE_TREE="sun8i-s3-pinecube"
> > > CONFIG_SPL=y
> > > -CONFIG_MACH_SUN8I_V3S=y
> > > -CONFIG_SUNXI_DRAM_DDR3_1333=y
> > > +CONFIG_MACH_SUN8I_V3=y
> > > CONFIG_DRAM_CLK=504
> > > CONFIG_DRAM_ODT_EN=y
> > > CONFIG_I2C0_ENABLE=y
> > > diff --git a/drivers/clk/sunxi/Kconfig
> > > b/drivers/clk/sunxi/Kconfig
> > > index 1c1cc82719cd..207d3bed7922 100644
> > > --- a/drivers/clk/sunxi/Kconfig
> > > +++ b/drivers/clk/sunxi/Kconfig
> > > @@ -68,7 +68,7 @@ config CLK_SUN8I_R40
> > >
> > > config CLK_SUN8I_V3S
> > > bool "Clock driver for Allwinner V3S"
> > > - default MACH_SUN8I_V3S
> > > + default MACH_SUN8I_V3_V3S
> > > help
> > > This enables common clock driver support for platforms
> > > based
> > > on Allwinner V3S SoC.
> > > diff --git a/drivers/phy/allwinner/Kconfig
> > > b/drivers/phy/allwinner/Kconfig
> > > index bb0bd8d5f812..335eff0a8bac 100644
> > > --- a/drivers/phy/allwinner/Kconfig
> > > +++ b/drivers/phy/allwinner/Kconfig
> > > @@ -5,7 +5,7 @@ config PHY_SUN4I_USB
> > > bool "Allwinner Sun4I USB PHY driver"
> > > depends on ARCH_SUNXI
> > > depends on !MACH_SUN9I
> > > - default n if MACH_SUN8I_V3S
> > > + default n if MACH_SUN8I_V3_V3S
> > > default y
> > > select DM_REGULATOR
> > > select PHY
> > > diff --git a/drivers/pinctrl/sunxi/Kconfig
> > > b/drivers/pinctrl/sunxi/Kconfig
> > > index 543149922998..59039917158e 100644
> > > --- a/drivers/pinctrl/sunxi/Kconfig
> > > +++ b/drivers/pinctrl/sunxi/Kconfig
> > > @@ -76,7 +76,7 @@ config PINCTRL_SUN8I_H3_R
> > >
> > > config PINCTRL_SUN8I_V3S
> > > bool "Support for the Allwinner V3s PIO"
> > > - default MACH_SUN8I_V3S
> > > + default MACH_SUN8I_V3_V3S
> > > select PINCTRL_SUNXI
> > >
> > > config PINCTRL_SUN9I_A80
> > > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> > > index eed65058e667..cdb3d712389c 100644
> > > --- a/drivers/power/Kconfig
> > > +++ b/drivers/power/Kconfig
> > > @@ -75,7 +75,7 @@ config AXP152_POWER
> > >
> > > config AXP209_POWER
> > > bool "axp209 pmic support"
> > > - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I ||
> > > MACH_SUN8I_V3S
> > > + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I ||
> > > MACH_SUN8I_V3
> > > select AXP_PMIC_BUS
> > > select CMD_POWEROFF
> > > ---help---
> >
>
