Enable OP-TEE config and RNG by default. Set OP-TEE load address to end of 1GiB RAM for phycore-imx8mp as the board is supported in a 1GiB RAM variant. For the imx8mm boards, only 2GiB versions are supported, so the default at the end of 2GiB is sufficient.
Signed-off-by: Yannic Moog <y.m...@phytec.de> --- configs/imx8mm-phygate-tauri-l_defconfig | 5 ++++- configs/phycore-imx8mm_defconfig | 5 ++++- configs/phycore-imx8mp_defconfig | 4 ++++ 3 files changed, 12 insertions(+), 2 deletions(-) diff --git a/configs/imx8mm-phygate-tauri-l_defconfig b/configs/imx8mm-phygate-tauri-l_defconfig index 7369c0a05ac98315682127f0e96af7d36c4763d2..6dc95d6d3edbc0b4ed25a66d23f1b65435e01697 100644 --- a/configs/imx8mm-phygate-tauri-l_defconfig +++ b/configs/imx8mm-phygate-tauri-l_defconfig @@ -73,9 +73,9 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_IMX8MM=y CONFIG_CLK_IMX8MM=y +CONFIG_FSL_CAAM=y CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y -CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x51 CONFIG_SUPPORT_EMMC_BOOT=y @@ -97,11 +97,14 @@ CONFIG_IMX8M_POWER_DOMAIN=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RNG=y CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y +CONFIG_TEE=y +CONFIG_OPTEE=y CONFIG_DM_THERMAL=y CONFIG_IMX_WATCHDOG=y diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig index 4d6bce26f07f7b90e7c3674f4b9ddcac8d775e1d..4cf4d3972567bcf77d9ee7e2fda707070a778c72 100644 --- a/configs/phycore-imx8mm_defconfig +++ b/configs/phycore-imx8mm_defconfig @@ -82,9 +82,9 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_IMX8MM=y CONFIG_CLK_IMX8MM=y +CONFIG_FSL_CAAM=y CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y -CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x51 CONFIG_SUPPORT_EMMC_BOOT=y @@ -120,6 +120,7 @@ CONFIG_POWER_DOMAIN=y CONFIG_IMX8M_POWER_DOMAIN=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RNG=y CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_SPI=y @@ -129,5 +130,7 @@ CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y +CONFIG_TEE=y +CONFIG_OPTEE=y CONFIG_DM_THERMAL=y CONFIG_IMX_WATCHDOG=y diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index 6bd8bcf15daa95966aa973d8a493ebc1f05b14e9..c497f0bcd9131abab0b751ec9cc81194405b1f19 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -13,6 +13,7 @@ CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_SYS_I2C_MXC_I2C1=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-phyboard-pollux-rdk" +CONFIG_IMX8M_OPTEE_LOAD_ADDR=0x7e000000 CONFIG_TARGET_PHYCORE_IMX8MP=y CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_SYS_MONITOR_LEN=524288 @@ -153,6 +154,7 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_SPL_POWER_I2C=y +CONFIG_DM_RNG=y CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_SPI=y @@ -162,6 +164,8 @@ CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y +CONFIG_TEE=y +CONFIG_OPTEE=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_DM_USB_GADGET=y -- 2.43.0
