On 8/13/25 10:53 AM, Patrice CHOTARD wrote:
On 8/8/25 17:24, Marek Vasut wrote:
On 8/8/25 5:11 PM, Patrice Chotard wrote:
This series introduces 2 new drivers:
_ STM32 Octo Memory Manager driver
_ STM32 OSPI driver
It adds resource check helpers which are used by OMM driver.
It adds and enables OMM and OSPI driver support for stm32mp257f-ev1 board
Can I test this with mainline TFA and mainline OpTee-OS ?
Hi Marek
Currently, it misses regulator support in OPTEE.
But you can enable "manually" VDDIO3 and VDDIO4 in U-Boot console
Actually, I need to enable VDDIO3/4 even earlier, otherwise I get no
UART and no I2C, so that's not a problem. VDDIO3/4 handling seems to be
broken in the ST downstream TFA with almost 1000 patches on top of old
version of TFA, and upstream TFA for STM32MP25xx is entirely bare bones
that it barely works.
I also didn't manage to start upstream U-Boot on STM32MP25xx at all yet,
I still have to upport about 400 patches (reduced from some 800 from ST
downstream old U-Boot fork), and the result won't work unless I use the
obsolete ST downstream OpTee-OS 4.0 fork with almost 1700 patches on top.
Maybe the upstream OpTee-OS is missing something, like the entire SCMI
implementation ?
