From: Chao-ying Fu <c...@mips.com>
Avoid writing to PCI_MEMORY_BASE and PCI_MEMORY_LIMIT registers for
bus 0, device 0 (the root bridge) in the Xilinx PCIe driver.
On platforms such as the MIPS Boston board, writing to these fields
results in incorrect values (e.g. base = 0x0, limit = 0x1600), which
causes Linux to fail PCIe memory space assignment.
As a result, Linux can boot successfully and probe the PCIe bus and
all connected devices on platforms like the MIPS Boston board.
Signed-off-by: Chao-ying Fu <c...@mips.com>
Signed-off-by: Uros Stajic <uros.sta...@htecgroup.com>
---
drivers/pci/pcie_xilinx.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/pci/pcie_xilinx.c b/drivers/pci/pcie_xilinx.c
index 63058e8e7c5..4ef20474a0b 100644
--- a/drivers/pci/pcie_xilinx.c
+++ b/drivers/pci/pcie_xilinx.c
@@ -132,6 +132,15 @@ static int pcie_xilinx_write_config(struct udevice *bus,
pci_dev_t bdf,
uint offset, ulong value,
enum pci_size_t size)
{
+ if (bdf == PCI_BDF(bus->seq_, 0, 0)) {
+ switch (offset) {
+ case PCI_MEMORY_BASE:
+ case PCI_MEMORY_LIMIT:
+ /* Writing the memory base or limit causes problems */
+ return 0;
+ }
+ }
+
return pci_generic_mmap_write_config(bus, pcie_xilinx_config_address,
bdf, offset, value, size);
}
--
2.34.1
