These values were calculated but not set.
They are required for the calculation of the delays, as stated in the
"QorIQ LS1043A Reference Manual, Rev. 6, 07/2020" page 2172.
The delays are calculated as (1/freq)*PCSSCK*CSSCK and
(1/freq)*PASC*ASC.
Signed-off-by: Tomas Alvarez Vanoli <tomas.alvarez-van...@hitachienergy.com>
---
drivers/spi/fsl_dspi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/fsl_dspi.c b/drivers/spi/fsl_dspi.c
index 545561ad116..412993ad377 100644
--- a/drivers/spi/fsl_dspi.c
+++ b/drivers/spi/fsl_dspi.c
@@ -473,7 +473,9 @@ static int fsl_dspi_child_pre_probe(struct udevice *dev)
priv->ctar_val[slave_plat->cs[0]] = DSPI_CTAR_DEFAULT_VALUE |
DSPI_CTAR_PCSSCK(pcssck) |
- DSPI_CTAR_PASC(pasc);
+ DSPI_CTAR_CSSCK(cssck) |
+ DSPI_CTAR_PASC(pasc) |
+ DSPI_CTAR_ASC(asc);
debug("DSPI pre_probe slave device on CS %u, max_hz %u, mode 0x%x.\n",
slave_plat->cs[0], slave_plat->max_hz, slave_plat->mode);
--
2.43.0
