> -----Original Message-----
> From: Ravulapalli, Naresh Kumar <naresh.kumar.ravulapa...@altera.com>
> Sent: Wednesday, August 20, 2025 3:32 PM
> To: u-boot@lists.denx.de
> Cc: Marek Vasut <marek.va...@mailbox.org>; Simon Goldschmidt
> <simon.k.r.goldschm...@gmail.com>; Michal Simek
> <michal.si...@amd.com>; Chee, Tien Fong <tien.fong.c...@altera.com>;
> Ng, Boon Khai <boon.khai...@altera.com>; Yuslaimi, Alif Zakuan
> <alif.zakuan.yusla...@altera.com>; Tom Rini <tr...@konsulko.com>;
> Ravulapalli, Naresh Kumar <naresh.kumar.ravulapa...@altera.com>
> Subject: [PATCH v2 3/3] drivers: fpga: Check bitstream address doesn't
> exceed 512MB
>
> Secure Device Manager(SDM) has only 512MB window address space to HPS
> over PSI BE link. The default access range is 0x0 to 0x1FFFFFFF.
> To allow SDM accessing the address space more than 512MB, SMMU has to
> be setup for address translation.
>
> A conditional check is added to not allow the fpga reconfiguration for any
> bitstream data where address exceeds 512MB, unless PSI BE link address
> translation is setup in SMMU.
>
> Signed-off-by: Naresh Kumar Ravulapalli
> <nareshkumar.ravulapa...@altera.com>
> ---
> arch/arm/mach-socfpga/include/mach/smmu_s10.h | 6 ++++++
> drivers/fpga/intel_sdm_mb.c | 13 +++++++++++++
> 2 files changed, 19 insertions(+)
>
> diff --git a/arch/arm/mach-socfpga/include/mach/smmu_s10.h
> b/arch/arm/mach-socfpga/include/mach/smmu_s10.h
> index 209caa86e38..d611664e227 100644
> --- a/arch/arm/mach-socfpga/include/mach/smmu_s10.h
> +++ b/arch/arm/mach-socfpga/include/mach/smmu_s10.h
> @@ -30,6 +30,12 @@
>
> #define SMMU_SID_SDM2HPS_PSI_BE 0
>
> +#define SDM2HPS_PSI_BE_ADDR_BASE 0
> +/* PSI BE 512MB address window */
> +#define SDM2HPS_PSI_BE_WINDOW_SZ 0x20000000
> +#define SDM2HPS_PSI_BE_ADDR_END \
> + (SDM2HPS_PSI_BE_ADDR_BASE + SDM2HPS_PSI_BE_WINDOW_SZ -
> 1)
> +
> void socfpga_init_smmu(void);
> int is_smmu_bypass(void);
> int is_smmu_stream_id_enabled(u32 stream_id); diff --git
> a/drivers/fpga/intel_sdm_mb.c b/drivers/fpga/intel_sdm_mb.c index
> 5f4aae47d6d..1bbb717015b 100644
> --- a/drivers/fpga/intel_sdm_mb.c
> +++ b/drivers/fpga/intel_sdm_mb.c
> @@ -10,6 +10,7 @@
> #include <watchdog.h>
> #include <asm/arch/mailbox_s10.h>
> #include <asm/arch/smc_api.h>
> +#include <asm/arch/smmu_s10.h>
> #include <asm/cache.h>
> #include <cpu_func.h>
> #include <linux/delay.h>
> @@ -1031,6 +1032,18 @@ int intel_sdm_mb_load(Altera_desc *desc, const
> void *rbf_data, size_t rbf_size)
>
> flush_dcache_range((unsigned long)rbf_data, (unsigned
> long)(rbf_data + rbf_size));
>
> + /*
> + * Don't start the FPGA reconfiguration if bitstream location exceed
> the
> + * PSI BE 512MB address window and SMMU is not setup for PSI BE
> address
> + * translation.
> + */
> + if (((u64)rbf_data + rbf_size) >= SDM2HPS_PSI_BE_ADDR_END &&
> + !is_smmu_stream_id_enabled(SMMU_SID_SDM2HPS_PSI_BE)) {
> + printf("Failed: Bitstream location must not exceed 0x%08x\n",
> + SDM2HPS_PSI_BE_ADDR_END);
> + return -EINVAL;
> + }
> +
> debug("Sending MBOX_RECONFIG...\n");
> ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_RECONFIG,
> MBOX_CMD_DIRECT, 0,
> NULL, 0, &resp_len, resp_buf);
> --
> 2.35.3
Reviewed-by: Tien Fong Chee <tien.fong.c...@altera.com>
Best regards,
Tien Fong
