On 2025/7/31 07:52, Jonas Karlman wrote:
Radxa E20C has a USB OTG Type-C port for Debug and Data. Add required Kconfig options to use USB gadget features once pending USB nodes finally lands in dts/upstream by a future sync. Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com> Thanks, - Kever
--- USB nodes for RK3528 has not yet landed in linux-rockchip maintainer tree, however USB features have been verified working in U-Boot using current pending DT patches. --- configs/radxa-e20c-rk3528_defconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/configs/radxa-e20c-rk3528_defconfig b/configs/radxa-e20c-rk3528_defconfig index f5e097f3edf8..0941d1b9be81 100644 --- a/configs/radxa-e20c-rk3528_defconfig +++ b/configs/radxa-e20c-rk3528_defconfig @@ -20,6 +20,8 @@ CONFIG_CMD_GPT=y CONFIG_CMD_MISC=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_RNG=y CONFIG_CMD_REGULATOR=y @@ -28,6 +30,7 @@ CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigne CONFIG_BUTTON=y CONFIG_BUTTON_ADC=y CONFIG_BUTTON_GPIO=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set CONFIG_ROCKCHIP_GPIO=y CONFIG_LED=y CONFIG_LED_GPIO=y @@ -43,6 +46,7 @@ CONFIG_DM_MDIO=y CONFIG_DWC_ETH_QOS=y CONFIG_DWC_ETH_QOS_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y CONFIG_REGULATOR_PWM=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_PWM_ROCKCHIP=y @@ -50,6 +54,12 @@ CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550_MEM32=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y CONFIG_ERRNO_STR=y
