Tiju wrote: > Hi [snipped unreadable original request]
> Because in http://wiki.openmoko.org/wiki/Uboot, the bootloader source > code section says..."The current bootloader patches can be found at > http://svn.openmoko.org/trunk/src/target/u-boot/patches/. Untar the > sources, apply the patch, run "make gta01bv3_config" (or > gta01bv2_config, or whatever hardware revision you have), run "make". > You will get a resulting "u-boot.bin" image, which you can directly > flash (either using existing bootloader or sjf2410-linux) into NAND." > > So, I do not know which version to apply the patches to. How do I get > the current git head of u-boot or the source code of the current > bootloader for which the patches has to be applied. > > Thanks > Tiju Jacob Openmoko has not been an active participant on the u-boot list. They took a snapshot of u-boot and then did their own patching, but did not feed the patches back to u-boot. The result is a fork. IIRC, there has been talk about unforking openmoko, but that has not happened yet. The bottom line is that we know little or nothing about openmoko's u-boot build methodology. You need to ask openmoko developers (openmoko lists). <http://lists.openmoko.org/mailman/listinfo/> Best regards, gvb ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
