In message <[EMAIL PROTECTED]> you wrote: > > the semantics are irrelevant. it's an external non-volatile memory device > accessed via the eeprom command. the document you posted looks like that > device doesnt have any way of querying it, so eeprom_info() for that device
Indeed. There is no way to query such devices. > would be useless. if this is normal among i2c eeproms, i'll repost the patch Thsi is normal for basicly *all* EEPROM and FRAM devices I know with I2C or SPI interfaces. > with eeprom_info behind CONFIG_SPI. most SPI flashes nowadays support the > jedec id command which allows for dynamic detection (which is how the > Blackfin SPI driver that i wrote works). hook up any SPI flash and it "jus> > t > works". I think you are doing something wrong when you try to use "eeprom" to access "SPI flash" - these are differnt entities... Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] "I find this a nice feature but it is not according to the documen- tation. Or is it a BUG?" "Let's call it an accidental feature. :-)" - Larry Wall in <[EMAIL PROTECTED]> ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users