tangwei <tziang <at> hotmail.com> writes: > dear ,all Hi Tangwei
> I have a board use S3C2442B43 (400MHz, 64MB mSDRAM, 128MB Nand), and there is > no flash or other memory,so have to use the nand boot, is there someone have > done something for this, please give me some advices, thanks. Booting from NAND flash usually requires some special provisions as code can not directly be executed from it. Have a look at nand_spl and its documentation in doc/README.nand-boot-ppc440 describing the process applicable to PowerPC SOCs. As I don't know much about the S3C2442B I can't give you any concrete advice there, but you will have to find out from its documentation whether and what its NAND booting provisions are. Cheers Marcel ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
