In message <[EMAIL PROTECTED]>
Nobuhiro Iwamatsu wrote:
>
> > +#define CONFIG_NETMASK 255.255.255.0
> > +#define CONFIG_IPADDR 192.168.10.100
> > +#define CONFIG_SERVERIP 192.168.10.77
> > +#define CONFIG_GATEWAYIP 192.168.10.77
> > +#define CONFIG_ETHADDR 00:00:00:07:08:09
>
> Please change MAC address.
> Does this board have Ether ROM?
> If this board doesn't have it, please set the MAC address in
> your company. This MAC address is not good.
The MAC address shout NOT be set in the board config file at all.
Don't do it, it is a very bad idea!
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
You Don't Have To Be 'Damned' To Work Here, But It Helps!!!
- Terry Pratchett, _Eric_
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
