On Jan 30, 2008 4:30 PM, Shinya Kuribayashi <[EMAIL PROTECTED]> wrote: > Current DMA or SPI driver breaks MIPS builds. > > example: > $ make gth2_config > $ make CROSS_COMPILE=mips-linux- > > leads to ... > > make[1]: Entering directory `/home/skuribay/devel/u-boot.git/drivers/dma' > mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 > -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding > -nostdinc -isystem > /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include > -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float > -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o MCD_tasks.o > MCD_tasks.c > In file included from MCD_tasks.c:25: > /home/skuribay/devel/u-boot.git/include/MCD_dma.h:279: error: expected > specifier-qualifier-list before '$30' > /home/skuribay/devel/u-boot.git/include/MCD_dma.h:295: error: expected > specifier-qualifier-list before '$30' > /home/skuribay/devel/u-boot.git/include/MCD_dma.h:323: error: expected > declaration specifiers or '...' before '$30' > /home/skuribay/devel/u-boot.git/include/MCD_dma.h:323: error: expected > declaration specifiers or '...' before '$30' > make[1]: *** [MCD_tasks.o] Error 1 > make[1]: Leaving directory `/home/skuribay/devel/u-boot.git/drivers/dma' > make: *** [drivers/dma/libdma.a] Error 2 > > > Then I modified $(TOPDIR)/Makefile like this, but still fails on SPI: > > diff --git a/Makefile b/Makefile > index 0f6cc59..619859d 100644 > --- a/Makefile > +++ b/Makefile > @@ -218,7 +218,6 @@ LIBS += net/libnet.a > LIBS += disk/libdisk.a > LIBS += drivers/bios_emulator/libatibiosemu.a > LIBS += drivers/block/libblock.a > -LIBS += drivers/dma/libdma.a > LIBS += drivers/hwmon/libhwmon.a > LIBS += drivers/i2c/libi2c.a > LIBS += drivers/input/libinput.a > > make -C drivers/spi/ > make[1]: Entering directory `/home/skuribay/devel/u-boot.git/drivers/spi' > mpc8xxx_spi.c:26:29: error: asm/mpc8xxx_spi.h: No such file or directory > make[1]: *** No rule to make target `.depend', needed by `libspi.a'. Stop. > make[1]: Leaving directory `/home/skuribay/devel/u-boot.git/drivers/spi' > make: *** [drivers/spi/libspi.a] Error 2 >
I posted a patch a couple of days ago that will fix the SPI problem. Don't know about the DMA. http://article.gmane.org/gmane.comp.boot-loaders.u-boot/36039 regards, Ben ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
