> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of iismail > Sent: 31 January 2008 03:00 > To: u-boot-users@lists.sourceforge.net > Subject: [U-Boot-Users] Standalone hello_world, data abort > error on ARM926 (AP) > > > Hi all, > > I am having problem running the "hello_world" examples that > comes with u-boot on ARM926 board.
---snip > > Then i load and run the standalone program "hello_world.bin" as follow > > VersatileAB # tftp 0xc100000 hello_world.bin Using MAC How did you come to choose 0xc1000000 - which as you say is Reserved? Unless you have modified your AB accordingly you must expect problems using a reserved address.... Try somewhere in SDRAM 0x000000 - 0x07FFFFFF (depending on your switch settings) as per your manual Regards Peter ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
