Hi TsiChung, I'm using the actual master head of the git-tree... then I think without the patch set.
luigi On lun, 2008-02-04 at 16:44 -0700, Liew Tsi Chung wrote: > Luigi, > > Is the problem you encountered after you implemented the "Move > PPC and M68K ramdiskloading to a common routine" patch or before? > > Regards, > TsiChung > > > -----Original Message----- > From: Luigi 'Comio' Mantellini [mailto:[EMAIL PROTECTED] > Sent: Monday, February 04, 2008 5:04 PM > To: Liew Tsi Chung > Cc: U-Boot-Users; Wolfgang Denx; Rigby John; Mahan James > Subject: Re: [U-Boot-Users] [PATCH] ColdFire: Fix missing code flash > sizefor M5485EVB > > Hi u-boot ml, > Hi Tsi Chung Liew, > > I have the following error compiling the M5475xxx targets: > > [code] > make[1]: Leaving directory `/mnt/devel/idf/u-boot/common' > make -C libfdt/ > make[1]: Entering directory `/mnt/devel/idf/u-boot/libfdt' > m68k-elf-ar crv libfdt.a > make[1]: Leaving directory `/mnt/devel/idf/u-boot/libfdt' > UNDEF_SYM=`m68k-elf-objdump -x lib_generic/libgeneric.a > board/freescale/common/libfreescale.a > board/freescale/m547xevb/libm547xevb.a cpu/mcf547x_8x/libmcf547x_8x.a > lib_m68k/libm68k.a fs/cramfs/libcramfs.a fs/fat/libfat.a > fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a > fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a > drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a > drivers/dma/libdma.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a > drivers/input/libinput.a drivers/misc/libmisc.a drivers/mtd/libmtd.a > drivers/mtd/nand/libnand.a drivers/mtd/nand_legacy/libnand_legacy.a > drivers/mtd/onenand/libonenand.a drivers/net/libnet.a > drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a > drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a > drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a > post/libpost.a post/drivers/libpostdrivers.a common/libcommon.a > libfdt/libfdt.a |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`; > \ > cd /mnt/devel/idf/u-boot && m68k-elf-ld -Bstatic -T > /mnt/devel/idf/u-boot/board/freescale/m547xevb/u-boot.lds -Ttext > 0xFF800000 -n $UNDEF_SYM cpu/mcf547x_8x/start.o \ > --start-group lib_generic/libgeneric.a > board/freescale/common/libfreescale.a > board/freescale/m547xevb/libm547xevb.a cpu/mcf547x_8x/libmcf547x_8x.a > lib_m68k/libm68k.a fs/cramfs/libcramfs.a fs/fat/libfat.a > fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a > fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a > drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a > drivers/dma/libdma.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a > drivers/input/libinput.a drivers/misc/libmisc.a drivers/mtd/libmtd.a > drivers/mtd/nand/libnand.a drivers/mtd/nand_legacy/libnand_legacy.a > drivers/mtd/onenand/libonenand.a drivers/net/libnet.a > drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a > drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a > drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a > post/libpost.a post/drivers/libpostdrivers.a common/libcommon.a > libfdt/libfdt.a --end-group -L /usr/local/lib/gcc/m68k-uclinux/4.1.1 > -lgcc \ > -Map u-boot.map -o u-boot > common/libcommon.a(cmd_bootm.o): In function `do_bootm_vxworks': > /mnt/devel/idf/u-boot/common/cmd_bootm.c:1622: undefined reference to > `do_bootvx' > common/libcommon.a(cmd_bootm.o): In function `do_bootm_qnxelf': > /mnt/devel/idf/u-boot/common/cmd_bootm.c:1636: undefined reference to > `do_bootelf' > common/libcommon.a(env_flash.o): In function `saveenv': > /mnt/devel/idf/u-boot/common/env_flash.c:312: undefined reference to > `flash_sect_protect' > /mnt/devel/idf/u-boot/common/env_flash.c:316: undefined reference to > `flash_sect_erase' > /mnt/devel/idf/u-boot/common/env_flash.c:329: undefined reference to > `flash_sect_protect' > make: *** [u-boot] Error 1 > [/code] > > I fixed the error modifying the common/Makefile: > ... > -COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o > +COBJS-y += cmd_elf.o > ... > -COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o > +COBJS-y += cmd_flash.o > ... > > forcing the compiling (and linking) of the cmd_flash.c and cmd_elf.c > files. > > I also noticed that the targets that define CFG_DRAMSZ1 cannot compile > because a "temp" variabile is used but not declared in the m547xevb.c > file. > > Best regards, > > luigi > > Il giorno mer, 30/01/2008 alle 15.11 -0600, Tsi-Chung Liew ha scritto: > > From: TsiChungLiew <[EMAIL PROTECTED]> > > > > Signed-off-by: James Mahan <[EMAIL PROTECTED]> > > Signed-off-by: TsiChung Liew <[EMAIL PROTECTED]> > > --- > > Makefile | 2 +- > > 1 files changed, 1 insertions(+), 1 deletions(-) > > > > diff --git a/Makefile b/Makefile > > index 0f6cc59..30fda62 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -1912,7 +1912,7 @@ M5485HFE_config : unconfig > > M5485EFE_config) > BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ > > M5485FFE_config) > BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ > > M5485GFE_config) > BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ > > - M5485HFE_config) BOOT=2;CODE=;VID=1;USB=0;RAM=64;RAM1=0;; > \ > > + M5485HFE_config) > BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ > > esac; \ > > >include/config.h ; \ > > echo "#define CFG_BUSCLK 100000000" > > $(obj)include/config.h ; \ > > Ing. Luigi Mantellini > Industrie Dial Face S.p.A. > Via Canzo, 4 > 20068 Peschiera Borromeo (MI) > Tel.: +39 02 5167 2813 > Fax: +39 02 5167 2459 > E-mail: [EMAIL PROTECTED] > > > Industrie Dial Face S.p.A. Luigi Mantellini R&D - Software Industrie Dial Face S.p.A. Via Canzo, 4 20068 Peschiera Borromeo (MI), Italy Tel.: +39 02 5167 2813 Fax: +39 02 5167 2459 E-mail: [EMAIL PROTECTED]
<<attachment: idf_logo.gif>>
------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
