Hi All,
I am working on a project where my processor is MIPS and my NOR flash size
is 32MB. So for i am managing all MTD partitions statically in
Linux and the system is working fine. Now we are planning to change the mtd
management to UBoot, so that i can add/delete/modify the partitions using
command line facility of UBoot.
i ported all required files to my working uboot sources, but not able to use
the command *mtdparts properly.*
My flash layout(partition info) shall look like:
Flash is top boot one:
Total Size:32MB
Partition1: 3-4MB (Linux kernel)
Partition2: 4-6MB(Root file system)
Partition3: 8MB(application active)
Partition4: 8MB(application backup)
Partition5:3MB(Data base)
Partitions6:512MB(UBoot)
Some free memory.
I wanted to put above info in UBoot using mtdparts. I tried to going thru
the code but confused bit.
Please can some one help me on getting some info regarding usage of mtdparts
related commands?
i have gone thru the mailing list also, but could not get much information.
Best Regards,
Nagi
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
