On Tuesday 12 February 2008, k b wrote: > I'm using the amcc taishan board and have a pci-x device connected to it. > 1) how do I take the pci device out of reset at boot up ?
This will be done automatically upon bootup/reset. > 2) and how do i reset the pci device ? I don't think that you can force a PCI reset manually. The PCI reset is most likely directly coupled with the board reset. But why are you asking? Do you experience problems with PCI-X devices on Taishan? Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
