Hi Matthias, On Wednesday 13 February 2008, Matthias Fuchs wrote: > what about a 'scrubenv' or 'cleanenv' command that tries to unset all > variables leaving readonlys untouched.
Or 'resetenv'? > The command could request a confirmation: > > => scrubenv > Do you really want to do this ('yes' or 'no')? yes > Can't overwrite "serial#" > Can't overwrite "ethaddr" > => saveenv Yes, I was just thinking (while showering, no joke) about this and had the same idea with an 'yes' check. :) > The above output is faked. So I did not start coding :-) > > What do you think? Looks good to me. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users