Flex-OneNAND booting support
Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array using a
NOR Flash interface. This on-chip integration enables system designers to
reduce external system logic and use high-density NAND Flash in applications
that would otherwise have to use more NOR components.
Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
in more flexible way. While MLC area of Flex-OneNAND can be used to store data
that require low reliability and high density, SLC area of Flex-OneNAND to
store data that need high reliability and high performance. Flex-OneNAND can
let users take advantage of storing these two different types of data into one
chip, which is making Flex-OneNAND more cost- and space-effective.
Signed-off-by: Kyungmin Park <[EMAIL PROTECTED]>
---
diff --git a/Makefile b/Makefile
index 9512b71..e9010b6 100644
--- a/Makefile
+++ b/Makefile
@@ -333,10 +333,12 @@ $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
$(obj)include/autoconf.mk
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin >
$(obj)u-boot-nand.bin
$(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk
- $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
+ $(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all
$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin
$(obj)include/autoconf.mk
+ $(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all
cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin >
$(obj)u-boot-onenand.bin
+ cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin >
$(obj)u-boot-flexonenand.bin
$(VERSION_FILE):
@( echo -n "#define U_BOOT_VERSION \"U-Boot " ; \
@@ -2914,7 +2916,9 @@ clean:
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map
@rm -f $(obj)onenand_ipl/onenand-ipl $(obj)onenand_ipl/onenand-ipl.bin \
- $(obj)onenand_ipl/onenand-ipl-2k.bin
$(obj)onenand_ipl/onenand-ipl.map
+ $(obj)onenand_ipl/onenand-ipl-2k.bin \
+ $(obj)onenand_ipl/onenand-ipl-4k.bin \
+ $(obj)onenand_ipl/onenand-ipl.map
@rm -f $(obj)api_examples/demo $(VERSION_FILE)
clobber: clean
diff --git a/drivers/mtd/onenand/onenand_base.c
b/drivers/mtd/onenand/onenand_base.c
index d4003a2..3b828fb 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1180,6 +1180,12 @@ static int onenand_probe(struct mtd_info *mtd)
if (maf_id != bram_maf_id || dev_id != bram_dev_id)
return -ENXIO;
+ /* FIXME : Current OneNAND MTD doesn't support Flex-OneNAND */
+ if (dev_id & (1 << 9)) {
+ printk("Not yet support Flex-OneNAND\n");
+ return -ENXIO;
+ }
+
/* Flash device information */
onenand_print_device_info(dev_id, 0);
this->device_id = dev_id;
diff --git a/onenand_ipl/board/apollon/Makefile
b/onenand_ipl/board/apollon/Makefile
index 66a0959..f10ed02 100644
--- a/onenand_ipl/board/apollon/Makefile
+++ b/onenand_ipl/board/apollon/Makefile
@@ -9,7 +9,7 @@ AFLAGS += -DCONFIG_ONENAND_IPL
CFLAGS += -DCONFIG_ONENAND_IPL
OBJCLFAGS += --gap-fill=0x00
-SOBJS = start.o low_levelinit.o # _memcpy32.o
+SOBJS = start.o low_levelinit.o
COBJS = apollon.o onenand_read.o onenand_boot.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
@@ -19,13 +19,16 @@ LNDIR := $(OBJTREE)/onenand_ipl/board/$(BOARDDIR)
onenandobj := $(OBJTREE)/onenand_ipl/
-ALL = $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl.bin
$(onenandobj)onenand-ipl-2k.bin
+ALL = $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl.bin
$(onenandobj)onenand-ipl-2k.bin $(onenandobj)onenand-ipl-4k.bin
all: $(obj).depend $(ALL)
$(onenandobj)onenand-ipl-2k.bin: $(onenandobj)onenand-ipl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=0x800 -O binary $< $@
+$(onenandobj)onenand-ipl-4k.bin: $(onenandobj)onenand-ipl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=0x1000 -O binary $< $@
+
$(onenandobj)onenand-ipl.bin: $(onenandobj)onenand-ipl
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
diff --git a/onenand_ipl/board/apollon/low_levelinit.S
b/onenand_ipl/board/apollon/low_levelinit.S
diff --git a/onenand_ipl/onenand_boot.c b/onenand_ipl/onenand_boot.c
index f30deae..35668ac 100644
--- a/onenand_ipl/onenand_boot.c
+++ b/onenand_ipl/onenand_boot.c
@@ -60,7 +60,7 @@ void start_oneboot(void)
buf = (uchar *) CFG_LOAD_ADDR;
- if (!onenand_read_block(buf, ONENAND_START_BLOCK))
+ if (!onenand_read_block0(buf))
buf += ONENAND_BLOCK_SIZE;
if (buf == (uchar *)CFG_LOAD_ADDR)
diff --git a/onenand_ipl/onenand_ipl.h b/onenand_ipl/onenand_ipl.h
index b9c6669..9188b96 100644
--- a/onenand_ipl/onenand_ipl.h
+++ b/onenand_ipl/onenand_ipl.h
@@ -23,7 +23,6 @@
#include <linux/mtd/onenand_regs.h>
-#define ONENAND_START_BLOCK 0
#define ONENAND_BLOCK_SIZE 2048
#ifndef CFG_PRINTF
@@ -40,5 +39,5 @@
#define ONENAND_PAGE_SIZE 2048
-extern int onenand_read_block(unsigned char *buf, ulong block);
+extern int onenand_read_block0(unsigned char *buf);
#endif
diff --git a/onenand_ipl/onenand_read.c b/onenand_ipl/onenand_read.c
index f553220..a0c4acf 100644
--- a/onenand_ipl/onenand_read.c
+++ b/onenand_ipl/onenand_read.c
@@ -33,8 +33,12 @@
#define onenand_buffer_address() ((1 << 3) << 8)
#define onenand_bufferram_address(block) (0)
+#ifdef __HAVE_ARCH_MEMCPY32
+extern void *memcpy32(void *dest, void *src, int size);
+#endif
+
/* read a page with ECC */
-static inline int onenand_read_page(ulong block, ulong page, u_char *buf)
+static inline int onenand_read_page(ulong block, ulong page, u_char *buf, int
pagesize)
{
unsigned long *base;
@@ -46,15 +50,15 @@ static inline int onenand_read_page(ulong block, ulong
page, u_char *buf)
onenand_writew(onenand_block_address(block),
THIS_ONENAND(ONENAND_REG_START_ADDRESS1));
+ onenand_writew(onenand_bufferram_address(block),
+ THIS_ONENAND(ONENAND_REG_START_ADDRESS2));
+
onenand_writew(onenand_sector_address(page),
THIS_ONENAND(ONENAND_REG_START_ADDRESS8));
onenand_writew(onenand_buffer_address(),
THIS_ONENAND(ONENAND_REG_START_BUFFER));
- onenand_writew(onenand_bufferram_address(block),
- THIS_ONENAND(ONENAND_REG_START_ADDRESS2));
-
onenand_writew(ONENAND_INT_CLEAR, THIS_ONENAND(ONENAND_REG_INTERRUPT));
onenand_writew(ONENAND_CMD_READ, THIS_ONENAND(ONENAND_REG_COMMAND));
@@ -69,9 +73,9 @@ static inline int onenand_read_page(ulong block, ulong page,
u_char *buf)
#ifdef __HAVE_ARCH_MEMCPY32
/* 32 bytes boundary memory copy */
- memcpy32(buf, base, ONENAND_PAGE_SIZE);
+ memcpy32(buf, base, pagesize);
#else
- for (offset = 0; offset < (ONENAND_PAGE_SIZE >> 2); offset++) {
+ for (offset = 0; offset < (pagesize >> 2); offset++) {
value = *(base + offset);
*p++ = value;
}
@@ -87,18 +91,22 @@ static inline int onenand_read_page(ulong block, ulong
page, u_char *buf)
* onenand_read_block - Read a block data to buf
* @return 0 on success
*/
-int onenand_read_block(unsigned char *buf, ulong block)
+int onenand_read_block0(unsigned char *buf)
{
int page, offset = 0;
+ int pagesize = ONENAND_PAGE_SIZE;
+
+ /* MLC OneNAND has 4KiB page size */
+ if (onenand_readw(THIS_ONENAND(ONENAND_REG_TECHNOLOGY)))
+ pagesize <<= 1;
/* NOTE: you must read page from page 1 of block 0 */
/* read the block page by page*/
for (page = ONENAND_START_PAGE;
page < ONENAND_PAGES_PER_BLOCK; page++) {
- onenand_read_page(block, page, buf + offset);
-
- offset += ONENAND_PAGE_SIZE;
+ onenand_read_page(0, page, buf + offset, pagesize);
+ offset += pagesize;
}
return 0;
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
