Hi,
On 22 Feb 2008 at 9:53, Pawel Pastuszak wrote:
>
> How would i go about halting u-boot, one on my requirement is to stop the
> board from booting if one of the POST test fails or anthor test fails.
>
> The only thing that i could think of was setting ....
>
> setenv("bootcmd", "");
>
>
> But i think there is a better way. Any suggestions,
I did not yet try it, but my idea to achieve this is to
have bootcmd be a simple conditional chain containing
all the tests and dependencies, in my case:
fpga loadmk 0 0x54000 && fpga loadmk 1 0x6c0000 && bootm 0x80000 || run_update
Again, this is just the idea I have for my own board, I did
not yet try it! (run_update is what will be our firmware
update function)
Regards,
Wolfgang
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
