Hi Quoting Michael Schwingen <[EMAIL PROTECTED]>: > michael wrote: >> I add the cycle only for testing and works, now I will take a look to the >> mii layer in the u-boot and maybe find a better and clean solution if I have >> spare time. >> > Did I get that right - you added a loop to check all PHY addresses,and > now it works on your board? > Yes > If yes, you simply need to define the right PHY address in your board > config, and it should work without the loop. > ... if I understand the physical address is latched during power on and if the logic is not good maybe it can be latched a different addresss in different session. I like somenthing that permits at software developer to easy search for the physical address.
Regards Michael ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
