Hello,
on my custom board I have 2 PCMCIA slots. After pcmcia init I get:
equantum> pinit on
Fixed Disk Card
IDE interface
[silicon] [single] [sleep] [standby] [idle] [low power]
but when I do "ide reset" I get:
Device 2: ide_outb (dev= 2, port= 0x1f6, val= 0xe0) : @ 0x200001f6
ide_inb (dev= 2, port= 0x1f2) : @ 0x200001f2 -> 0xd1
ide_outb (dev= 2, port= 0x1f7, val= 0xec) : @ 0x200001f7
ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0xd1
ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0x58
in input data base for read is 200001f0
Model: Industrial CF Card Firm: ra03.00f Ser#: CIAF01000045 1
Type: Removable Hard Disk
Capacity: 125.0 MB = 0.1 GB (256000 x 512)
ide_read dev 2 start 0, blocks 1 buffer at A2EFF918
ide_outb (dev= 2, port= 0x1f6, val= 0xe0) : @ 0x200001f6
ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0xd0
ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0x51
ide_outb (dev= 2, port= 0x1f7, val= 0xe5) : @ 0x200001f7
ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0xd1
ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0x50
ide_inb (dev= 2, port= 0x1f2) : @ 0x200001f2 -> 0x00
Powersaving 00
ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0x50
ide_outb (dev= 2, port= 0x1f2, val= 0x01) : @ 0x200001f2
ide_outb (dev= 2, port= 0x1f3, val= 0x00) : @ 0x200001f3
ide_outb (dev= 2, port= 0x1f4, val= 0x00) : @ 0x200001f4
ide_outb (dev= 2, port= 0x1f5, val= 0x00) : @ 0x200001f5
ide_outb (dev= 2, port= 0x1f6, val= 0xe0) : @ 0x200001f6
ide_outb (dev= 2, port= 0x1f7, val= 0x20) : @ 0x200001f7
ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0xd1
ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0x51
Error (no IRQ) dev 2 blk 0: status 0x51
So, the CF is recognized but when the system tries to read first
sectors something goes wrong!
Any suggestions?
Rodolfo
--
GNU/Linux Solutions e-mail: [EMAIL PROTECTED]
Linux Device Driver [EMAIL PROTECTED]
Embedded Systems [EMAIL PROTECTED]
UNIX programming phone: +39 349 2432127
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
