Hi, We are using MPC8555 processor and uboot 1.1.4 both the uboot and linux was up. Now we plan to port QNX, we are facing following issues.
1. Qnx is not jumping to the startup location. After giving go command control is still in the uboot only. 2. When searching in the mailling list we came to know qnx required to flush the Data Cache before disabling it in the uboot level (common/cmd_bootelf.c line no:59) 3. I checked other powerpc architecture like 7xx/74xx, 86xx and 4xx. These architecture has seperate cache.S file ( cpu/mpc86xx/cache.S). That file contains flush_data_cache function to flush the cache before disabling it. But in the MPC85xx flushing the data cache was missing. 4. This is a bug in the 85xx uboot code. Is there any work arround for this? Thanks and Regards S.Balamurugan ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
