Hi, Im working on adding support for our board to u-boot.
I use legacy flash mode for our boot-flash. I however have some problems with it. When using jedec probe to identify our flash. Im unable to do so with our 16bit device-id. In my opinion it seems like this actually wont work(?) cmdset_amd_read_jedec_ids uses _one_ flash_read_uchar call to read out the device id(, if its not an amd extended one). The only way i could get this to work with our flash was to only put the lower 8bit in the dev_id field when adding an entry to the jedec_table. Further on it seems like CFI_CMDSET_AMD_LEGACY is unsupported in flash_write_cfibuffer. /Tor ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
