I will change it at the later patch with three CF EVBs. Regards, TsiChung
-----Original Message----- From: Stefan Roese [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 19, 2008 3:34 AM To: u-boot-users@lists.sourceforge.net Cc: Jean-Christophe PLAGNIOL-VILLARD; Liew Tsi Chung; Wolfgang Denx; Rigby John Subject: Re: [U-Boot-Users] [PATCH] Add support CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in pci_auto.c On Wednesday 19 March 2008, Jean-Christophe PLAGNIOL-VILLARD wrote: > > diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index > > acfda83..1085a6c 100644 > > --- a/drivers/pci/pci_auto.c > > +++ b/drivers/pci/pci_auto.c > > @@ -383,7 +383,7 @@ int pciauto_config_device(struct pci_controller > > *hose, pci_dev_t dev) hose->current_busno++; > > break; > > > > -#ifdef CONFIG_MPC5200 > > +#if defined(CONFIG_MPC5200) || > > +defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE) > > I think that you can remove the CONFIG_MPC5200 and define it in the > configs of the boards That would be the optimal version of course. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
