Hi Matthias, On Saturday 22 March 2008, Matthias Fuchs wrote: > I followed this discussion. The DU440 board will also need this fix. > On the PMC440 board we reserved the top memory region for > some PCI accessable shared memory. I will check how we can > handle skipping the top 256 bytes and provide a patch for both of our > 440EPx boards soon.
Good. > I did not get into much depth with this issue, but your fix will make the > logbuffer ram and pram unaligned to a page boundary. I am not sure if this > is a good idea. Let's say you want to ioremap the pram under Linux you > cannot let the mapped region end at log bufferbuffer start address because > it just lost its alignment on a 4k page boundary. Good point. If nobody objects I'll change the size of CFG_MEM_TOP_HIDE from 256 to 4k in the next patch version. Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
