Kim Phillips schrieb:
On Tue, 25 Mar 2008 18:36:47 +0100
Andre Schwarz <[EMAIL PROTECTED]> wrote:

All,

has anyone set up the DDR-II controller on a Freescale MPC8343A without ?

without what?

typo - sorry.
As far as I can see there are only DDR-I boards from Freescale.

The MDS can do ddr2:

U-Boot 1.3.2-00097-gbc508d1 (Mar 25 2008 - 10:47:17) MPC83XX

Reset Status: Software Hard, External/Internal Soft, External/Internal Hard

CPU:   e300c1, MPC8349E, Rev: 30 at 528 MHz, CSB:  264 MHz
Board: Freescale MPC8349EMDS
I2C:   ready
SPI:   ready
DRAM:  256 MB (DDR2, 64-bit, ECC on)
...

Hmmm ... I get :

U-Boot 1.3.2-00075-gc5f497a-dirty (Mar 25 2008 - 19:55:00) MPC83XX

Reset Status: Check Stop, External/Internal Soft, External/Internal Hard

CPU:   e300c1, MPC8343, Rev: 31 at 399.999 MHz, CSB:  266 MHz
Board: Matrix Vision mvBlueLYNX-M7
I2C:   ready
SPI:   ready
DRAM:  cs0_bnds = 0x0000000f
cs0_config = 0x80844102
DDR:bar=0x00000000
DDR:ar=0x8000001b
256 MB


It's a 32-Bit DDR-II without ECC.
2 Chips are soldered to CS0, i.e. no EPROM present.

Since I expect something like "(DDR2, 32-Bit, ECC off)" and nothing happens there is obviously something wrong with my memory setup.
Is this reasonable ?

Or am I simply missing a board specific "board_add_ram_info" ?
Am I assuming right that your info string "(DDR2, 64-bit, ECC on)" comes from spd_sdram ?
Are there any patches not yet posted to handle this ?

should work, only diff I see is that the 8343 is 32-bit only.

Kim
I'll dig a little deeper now and ask more questions tommorow.


Thanks for your help !

regards,
Andre



MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler  - Registergericht: 
Amtsgericht Stuttgart, HRB 271090
Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Reply via email to