> > ata: merge the ata_piix driver > > ata: add the support for SATA framework > > ata: make the ata_piix driver using new SATA framework > > ata: add the libata support > > ata: add the fis struct for SATA > > ata: enable the sata init on bootup > > ata: add the readme for SATA command line > > mpc83xx: initialize serdes for MPC837xEMDS boards > > drivers: Add the support for Freescale SATA controller > > mpc83xx: enable the SATA interface on mpc837xemds board > > You don't mention anythiong about the sc520 board here, yet...
Currently, the ata_piix driver only is used by sc520 board. > > board/freescale/mpc837xemds/mpc837xemds.c | 33 + > > common/Makefile | 2 +- > > common/cmd_sata.c | 768 +++ > > +-------------------- > > disk/part.c | 14 + > > disk/part_dos.c | 2 + > > disk/part_iso.c | 2 + > > disk/part_mac.c | 1 + > > doc/README.sata | 69 +++ > > drivers/block/Makefile | 2 + > > drivers/block/ata_piix.c | 585 ++++++++++++++++++- > > drivers/block/fsl_sata.c | 921 ++++++++++++++++++++++ > > +++++++ > > drivers/block/fsl_sata.h | 374 ++++++++++++ > > drivers/block/libata.c | 158 +++++ > > include/configs/MPC837XEMDS.h | 28 + > > include/configs/sc520_cdp.h | 27 +- > > ...you're trying to sneak in configuration changes here. > > Have these been tested? I have not the sc520_cdp x86 board, so I can not test it. but building/compiling it is passed. > If yes, then please split these off into a separate patch. > > If not, then just dump it. dump it, sorry, what do you mean? Thanks, Dave ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
