This fixes a naming bug for at91rm9200 lowlevel init code:
NOR boot flash is on chipselect 0, not chipselect 2. This
makes code use the register name from chip datasheets.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[EMAIL PROTECTED]>
diff --git a/board/m501sk/memsetup.S b/board/m501sk/memsetup.S
index 9e174b5..6aea723 100644
--- a/board/m501sk/memsetup.S
+++ b/board/m501sk/memsetup.S
@@ -52,8 +52,8 @@
#define MC_AASR_VAL 0x00000000
#define EBI_CFGR 0xFFFFFF64
#define EBI_CFGR_VAL 0x00000000
-#define SMC2_CSR 0xFFFFFF70
-#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define SMC_CSR0 0xFFFFFF70
+#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
/* clocks */
#define PLLAR 0xFFFFFC28
@@ -141,8 +141,8 @@ SMRDATA:
.word MC_AASR_VAL
.word EBI_CFGR
.word EBI_CFGR_VAL
- .word SMC2_CSR
- .word SMC2_CSR_VAL
+ .word SMC_CSR0
+ .word SMC_CSR0_VAL
.word PLLAR
.word PLLAR_VAL
.word PLLBR
--
1.5.4.1
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
