I am running uBoot on a DM6646 DSP and am not able to see an ARP Response
from the network. When using the Davinci EVM board, I send out a ping and
while monitoring the Ethernet traffic. I see an ARP Request from the DSP,
Arp Response from my PC, and then an Echo Request from the DSP. When I try
this with my custom board, I never get an Echo Request. I have verified that
the receive signals going from the PHY to the DSP are present.
I am using a Marvell 88E3018 PHY where the Davinci EVM board uses an Intel
PHY. I have not verified whether this is a hardware or software problem,
where uBoot may need to be modified.
Any help is appreciated,
Regards,
Eric Palmer
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
