In the flash, I have the following partitions in a flash:
mtd0 : u-boot-1.1.4
mtd1 : rootfs
mtd2 : env
mtd3 : rootfs_upgrade
....
I noticed that uboot search the entire flash for uImage. If I have 2
uImage (i.e. 2 root filesystems) in the flash, it will fail to boot up.
What I did is to lie the memory size to u-boot so that it only search
from mtd0 to mtd2.
Is there any command I can set to change where it is booted from?
(dev/mtd1 or dev/mtd3)
Thanks for your help.
Regards,
Terence
-----------------------------------------
This message (including any attachments) may contain confidential
information intended for a specific individual and purpose. If you
are not the intended recipient, delete this message. If you are
not the intended recipient, disclosing, copying, distributing, or
taking any action based on this message is strictly prohibited.
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Register now and save $200. Hurry, offer ends at 11:59 p.m.,
Monday, April 7! Use priority code J8TLD2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
