On Tuesday 08 April 2008, Stefan Roese wrote: > > Below is the most of my init.S file. You are correct about the > > faulting location. But I can see in the init.S file that this address > > location is defined as "AC_R|AC_W|AC_X|SA_G" so I think I should be > > able to at least read it. When I boot from 256Mb NAND flash, I don't > > see this problem. Its only when I boot from 1Gb NAND flash. > > Did you get this problem fixed on your board? If yes, what was it? > > I'm asking because I'm currently adding 2k page size NAND device support to > nand_spl and I'm seeing some strange exception on my target after running > from SDRAM.
Never mind. I found my problem. One size was set incorrectly. Now I can boot successfully from 2k page size NAND devices. Patch for review will follow soon. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Register now and save $200. Hurry, offer ends at 11:59 p.m., Monday, April 7! Use priority code J8TLD2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
