Hi All, I have been struggling the last week to get the macb Ethernet driver in MII mode.
[in short] I have communication over the MDIO interface, my activity led blinks but no ehternet. [the long story] I have a custom board build out of the schematics of the AT91SAM9260EK board. On my boar I did not use the DM9161 but the KS8721chip. On the ATMEL board the PHY works in RMII mode, on my board I used MII mode like this board from OLIMEX [1]. Olimex was kind enough to make Uboot nandflash build working with there board, And deliver sources I cant compile, due to an error: Hardware float vs software float. But I want a dataflash version because I am using a BGA chip with nandflash bug. In my current setup I use the latest git of the AT91 tree with the following defines: #define CONFIG_MACB 1 #define CONFIG_MII 1 #undef CONFIG_RMII #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 5000 #define CONFIG_RESET_PHY_R 1 With this config I have the MDIO interface working, when I try to ping or TFTP I only get time outs / host not alive errors. Is there someone out there how has the MII mode working? Best regards, Sander [1] http://www.olimex.com/dev/sam9-L9260.html (schematics on the bottom of the page) ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
