In message <[EMAIL PROTECTED]> you wrote:
>
> Le samedi 12 avril 2008 =E0 21:03 +0200, Ulf Samuelsson a =E9crit :
> > Add ID codes for most recent Atmel NOR flashes
>
> Is there any added value on using the atmel flash driver instead of the
> standard CFI driver ? It surely doesn't have any on the SAM9/CAP9
> boards, but I'm not sure of the older AT91RM9200.
I don't think there is.
For the existing boards, the already exisitng values should be
sufficient, and for new boards we should use the CFI driver.
I intend to NAK new boards with CFI conformant flashes that don't use
the CFI driver unless thay have very good reasons.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
"The more data I punch in this card, the lighter it becomes, and the
lower the mailing cost."
- Stan Kelly-Bootle, "The Devil's DP Dictionary"
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
