[EMAIL PROTECTED] wrote on : > In message <[EMAIL PROTECTED]> > you wrote: > > According to the ata (ata5) specification the RESET- signal > > shall be asserted for at least 25 us. Without this patch, > > the RESET- signal is asserted on some boards for only < 1 us > > (e. g. on the TQM5200). This patch adds a general delay of > > 25 us to the RESET- signal. > > Already applied. > > If you want to send follow-ups to previous postings. please make sure > to keep the reference information intact. As is, it was impossible to
I'm sorry for that! I tried to mark this patch as follup-up by the "v2" in the Subject, but I see, that this was not sufficient. What do you mean with reference information? The message id? Does anyone know, how I can re-send a modified patch with git (or stacked git which I use normally) without generating a new message ID (and without copy- and pasteing the new patch in the reply email)? Best Regards, Martin Krause -- TQ-Systems GmbH Muehlstrasse 2, Gut Delling, D-82229 Seefeld Amtsgericht Muenchen, HRB 105 018, UST-IdNr. DE 811 607 913 Geschaeftsfuehrer: Dipl.-Ing. (FH) Detlef Schneider, Dipl.-Ing. (FH) Ruediger Stahl http://www.tq-group.com ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
