All, Just curious if anyone has done any work with this near past. I have had an 8360E board up for several months now and been happily working away with different types of Kingston S0-DIMM DDR2 memory.
512MB, 1204MB, DDR2 533Mhz memory. All work well, with U-boot. Using the SPD detectetion, things have just been automatically detected and worked wonderful. Yesterday I went down and purchased two additional sticks of 1024MB DDR2 Crucial 667Mhz memory, as 533Mhz is in short supply. SPD detect still works in U-boot and everything is detected correctly. However, the u-boot will now hang when it tries to transfer execution into RAM. At first I figured this was a memory speed issue, since 667Mhz is not technically supported on the 8360E yet <Rev 2... I might be wrong on this?>, So I patched in a quick line of code to force the spd detection to limit to 533Mhz. Still doesn't work. Any ideas? Again, same exact u-boot just different memory. SPD sees it all just fine, just can't use the RAM after its setup. Currently using a slightly older version of U-boot 1.3.0-dirty. -Russ ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
