--- [EMAIL PROTECTED] wrote:
>
> HI ,
>
> I am newbie to U-Boot, I have a customized board with u-boot
> with it, I have seen through top level makefile of
> U-Boot.Below stated is what I have observed from makefile.
>
> 1. First initialization of processor (ARM922t in my case) is
> done in CPU folder with Startup.S where this assembly routine
> will call low_level_init code for initialization of RAM of
> customized board.
>
> 2. Further I have observed rest all code which are required
> for boot-up is made as library and compiled at once.
>
> I would like to know how the code flow of U-Boot takes place
> , which are all the files which will be called in sequence
> while boot operation takes place, as far I have seen the code,
> Startup.S is one which starts first clearing Stack & PC which
> will further calls low_level_Init, I am unable to know how
> U-Boot works further from this place.
>
> I would request U-Boot users to share there knowledge in
> explaining me how the code flow of U-Boot takes place, which
> will help me in finishing my project where RAM & Flash is
> changed.
>
>
> Best Regards,
> Rajesh
>
cscope is your friend...
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
