Dear list, I am currently working on a custom board, trying to get the National DP83848 Phy to work properly with the AT91SAM9260 in u-boot 1.2.0; Everything goes fine (reset is ok, can read phy id) until I read the link status bit. The link status bit is never set, so I never get a good connection.
I have tried the following: -Bit banged the MDIO directly to the via the parallel port as per National's suggestion. The link status bit went high in this case, so I do not believe there are any wiring faults in our board. Does anybody know of a u-boot driver for the phy with the AT91SAM9260? Has anyone had any success with this combination? Thanks, Dave ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
