Hello,
U-Boot v1.3.3-rc2 has just been released.
PowerPC seems to be in a pretty good state now; other architectures
still need a lot of testing / fixing. For example, on ARM we see the
following conflicts:
Configuring for kb9202 board...
start.S: Assembler messages:
start.S:205: Error: invalid constant -- `sub r0,r0,#(0x0200+128*1024)'
start.S:378: Error: invalid constant -- `sub
r13,r13,#((32*1024)+(0x0200+128*1024))'
start.S:379: Error: invalid constant -- `sub
r2,r2,#((32*1024)+(0x0200+128*1024))'
start.S:384: Error: invalid constant -- `sub
r13,r13,#((32*1024)+(0x0200+128*1024))'
start.S:385: Error: invalid constant -- `sub
r2,r2,#((32*1024)+(0x0200+128*1024))'
start.S:390: Error: invalid constant -- `sub
r13,r13,#((32*1024)+(0x0200+128*1024))'
start.S:391: Error: invalid constant -- `sub
r2,r2,#((32*1024)+(0x0200+128*1024))'
start.S:396: Error: invalid constant -- `sub
r13,r13,#((32*1024)+(0x0200+128*1024))'
start.S:397: Error: invalid constant -- `sub
r2,r2,#((32*1024)+(0x0200+128*1024))'
start.S:402: Error: invalid constant -- `sub
r13,r13,#((32*1024)+(0x0200+128*1024))'
start.S:403: Error: invalid constant -- `sub
r2,r2,#((32*1024)+(0x0200+128*1024))'
start.S:427: Error: invalid constant -- `sub
r13,r13,#((32*1024)+(0x0200+128*1024))'
start.S:428: Error: invalid constant -- `sub
r2,r2,#((32*1024)+(0x0200+128*1024))'
start.S:433: Error: invalid constant -- `sub
r13,r13,#((32*1024)+(0x0200+128*1024))'
start.S:434: Error: invalid constant -- `sub
r2,r2,#((32*1024)+(0x0200+128*1024))'
make[1]: *** [start.o] Error 1
Configuring for netstar board...
arm-linux-ld: cannot find -lgeneric
make[1]: *** [eeprom.srec] Error 1
Configuring for voiceblue board...
arm-linux-ld: cannot find -lgeneric
make[1]: *** [eeprom.srec] Error 1
Configuring for apollon board...
onenand_base.c:25: error: static declaration of 'memcpy' follows non-static
declaration
/home/wd/git/u-boot/master/include/linux/string.h:70: error: previous
declaration of 'memcpy' was here
make[1]: *** [onenand_base.o] Error 1
Configuring for adsvix board...
start.S:183:1: warning: "ICMR" redefined
In file included from start.S:33:
/home/wd/git/u-boot/master/include/asm/arch/pxa-regs.h:935:1: warning: this is
the location of the previous definition
start.S:187:1: warning: "RCSR" redefined
/home/wd/git/u-boot/master/include/asm/arch/pxa-regs.h:1602:1: warning: this is
the location of the previous definition
start.S:191:1: warning: "OSMR3" redefined
/home/wd/git/u-boot/master/include/asm/arch/pxa-regs.h:869:1: warning: this is
the location of the previous definition
start.S:192:1: warning: "OSCR" redefined
/home/wd/git/u-boot/master/include/asm/arch/pxa-regs.h:870:1: warning: this is
the location of the previous definition
start.S:193:1: warning: "OWER" redefined
/home/wd/git/u-boot/master/include/asm/arch/pxa-regs.h:872:1: warning: this is
the location of the previous definition
start.S:194:1: warning: "OIER" redefined
/home/wd/git/u-boot/master/include/asm/arch/pxa-regs.h:873:1: warning: this is
the location of the previous definition
start.S:207:1: warning: "CCCR" redefined
/home/wd/git/u-boot/master/include/asm/arch/pxa-regs.h:1770:1: warning: this is
the location of the previous definition
pcmcia.c:39:2: warning: #warning "Board will only supply 5V, wait for next HW
spin for selectable power"
pxa_pcmcia.c: In function 'pcmcia_on':
pxa_pcmcia.c:39: warning: operation on 'i' may be undefined
cmd_ide.c: In function '__ide_outb':
cmd_ide.c:828: warning: implicit declaration of function 'outb'
cmd_ide.c: In function '__ide_inb':
cmd_ide.c:837: warning: implicit declaration of function 'inb'
common/libcommon.a(cmd_ide.o): In function `__ide_outb':
/home/wd/git/u-boot/master/common/cmd_ide.c:828: undefined reference to `outb'
common/libcommon.a(cmd_ide.o): In function `__ide_inb':
/home/wd/git/u-boot/master/common/cmd_ide.c:837: undefined reference to `inb'
make: *** [u-boot] Error 1
Configuring for actux4 board...
actux4.c: In function 'board_init':
actux4.c:83: warning: left shift count >= width of type
actux4.c:83: warning: left shift count >= width of type
Configuring for davinci_schmoogie board...
env_nand.c: In function 'saveenv':
env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible
pointer type
env_nand.c: In function 'env_relocate_spec':
env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible
pointer type
Board maintainers / custodians - please help!
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
If programming was easy, they wouldn't need something as complicated
as a human being to do it, now would they?
- L. Wall & R. L. Schwartz, _Programming Perl_
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
