This patch makes the necessary adaptations (PIO configurations and
defines in config header file) to hook up the Atmel LCD driver to the
AT91SAM9261EK board.

Signed-off-by: Stelian Pop <[EMAIL PROTECTED]>
---
 board/atmel/at91sam9261ek/at91sam9261ek.c |   64 +++++++++++++++++++++++++++++
 include/configs/at91sam9261ek.h           |   13 ++++++
 2 files changed, 77 insertions(+), 0 deletions(-)

diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c 
b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 96b4422..3de234c 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -30,6 +30,8 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
 #include <net.h>
 #endif
@@ -150,6 +152,65 @@ static void at91sam9261ek_dm9000_hw_init(void)
 }
 #endif
 
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+       vl_col:         240,
+       vl_row:         320,
+       vl_clk:         4965000,
+       vl_sync:        ATMEL_LCDC_INVLINE_INVERTED |
+                       ATMEL_LCDC_INVFRAME_INVERTED,
+       vl_bpix:        3,
+       vl_tft:         1,
+       vl_hsync_len:   5,
+       vl_left_margin: 1,
+       vl_right_margin:33,
+       vl_vsync_len:   1,
+       vl_upper_margin:1,
+       vl_lower_margin:0,
+       mmio:           AT91SAM9261_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+       at91_set_gpio_value(AT91_PIN_PA12, 0);  /* power up */
+}
+
+void lcd_disable(void)
+{
+       at91_set_gpio_value(AT91_PIN_PA12, 1);  /* power down */
+}
+
+static void at91sam9261ek_lcd_hw_init(void)
+{
+       at91_set_A_periph(AT91_PIN_PB1, 0);     /* LCDHSYNC */
+       at91_set_A_periph(AT91_PIN_PB2, 0);     /* LCDDOTCK */
+       at91_set_A_periph(AT91_PIN_PB3, 0);     /* LCDDEN */
+       at91_set_A_periph(AT91_PIN_PB4, 0);     /* LCDCC */
+       at91_set_A_periph(AT91_PIN_PB7, 0);     /* LCDD2 */
+       at91_set_A_periph(AT91_PIN_PB8, 0);     /* LCDD3 */
+       at91_set_A_periph(AT91_PIN_PB9, 0);     /* LCDD4 */
+       at91_set_A_periph(AT91_PIN_PB10, 0);    /* LCDD5 */
+       at91_set_A_periph(AT91_PIN_PB11, 0);    /* LCDD6 */
+       at91_set_A_periph(AT91_PIN_PB12, 0);    /* LCDD7 */
+       at91_set_A_periph(AT91_PIN_PB15, 0);    /* LCDD10 */
+       at91_set_A_periph(AT91_PIN_PB16, 0);    /* LCDD11 */
+       at91_set_A_periph(AT91_PIN_PB17, 0);    /* LCDD12 */
+       at91_set_A_periph(AT91_PIN_PB18, 0);    /* LCDD13 */
+       at91_set_A_periph(AT91_PIN_PB19, 0);    /* LCDD14 */
+       at91_set_A_periph(AT91_PIN_PB20, 0);    /* LCDD15 */
+       at91_set_B_periph(AT91_PIN_PB23, 0);    /* LCDD18 */
+       at91_set_B_periph(AT91_PIN_PB24, 0);    /* LCDD19 */
+       at91_set_B_periph(AT91_PIN_PB25, 0);    /* LCDD20 */
+       at91_set_B_periph(AT91_PIN_PB26, 0);    /* LCDD21 */
+       at91_set_B_periph(AT91_PIN_PB27, 0);    /* LCDD22 */
+       at91_set_B_periph(AT91_PIN_PB28, 0);    /* LCDD23 */
+
+       at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+
+       gd->fb_base = AT91SAM9261_SRAM_BASE;
+}
+#endif
+
 int board_init(void)
 {
        /* Enable Ctrlc */
@@ -170,6 +231,9 @@ int board_init(void)
 #ifdef CONFIG_DRIVER_DM9000
        at91sam9261ek_dm9000_hw_init();
 #endif
+#ifdef CONFIG_LCD
+       at91sam9261ek_lcd_hw_init();
+#endif
        return 0;
 }
 
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 96fc6af..df46268 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -28,6 +28,7 @@
 #define __CONFIG_H
 
 /* ARM asynchronous clock */
+#define AT91_CPU_NAME          "AT91SAM9261"
 #define AT91_MAIN_CLOCK                198656000       /* from 18.432 MHz 
crystal */
 #define AT91_MASTER_CLOCK      99328000        /* peripheral = main / 2 */
 #define CFG_HZ                 1000000         /* 1us resolution */
@@ -55,6 +56,18 @@
 #undef CONFIG_USART2
 #define CONFIG_USART3          1       /* USART 3 is DBGU */
 
+/* LCD */
+#define CONFIG_LCD                     1
+#define LCD_BPP                                LCD_COLOR8
+#define CONFIG_LCD_LOGO                        1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO                        1
+#define CONFIG_LCD_INFO_BELOW_LOGO     1
+#define CFG_WHITE_ON_BLACK             1
+#define CONFIG_ATMEL_LCD               1
+#define CONFIG_ATMEL_LCD_BGR555                1
+#define CFG_CONSOLE_IS_IN_ENV          1
+
 #define CONFIG_BOOTDELAY       3
 
 /* #define CONFIG_ENV_OVERWRITE        1 */
-- 
1.5.3.3


-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Reply via email to