Wolfgang, I don't think this patch is necessary because for all e500v2 core, setting RSTCR is the right way to reset the board.
I think you should check board FPGA. I met the similar problem before. Since FPGA did not correctly route the HRESET_REQ signal, setting RSTCR did not cause reset. After hardware person fixed the FPGA code, it worked fine. Haiying On Fri, 2008-05-09 at 17:51 +0200, Wolfgang Denk wrote: > Hi Andy, > > could you please have a look at this patch? > > The situation is that we don't understand why it's necessary - we > have verified that the correct register (RSTCR at IMMR+0xe00b0) is > updated with the correct value (0x2), but this doesn't cause a reset. > Documentation states that no other prerequisites or conditions are > required for hard reset to work. > > We have the same problem in Linux, too. > > This is on a custom MPC8548 board... > > Any ideas what might be causing such behaviour and/or how to avoid > this? > > Thanks in advance. > > Best regards, > > Wolfgang Denk > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
