Jean-Christophe PLAGNIOL-VILLARD <plagnioj <at> jcrosoft.com> writes:
> > On 21:03 Mon 12 May , Kevin Greer wrote: > > Hello, > > > > Does anyone know if u-boot will work with the SMSC LAN8700 (same > > interface > > as LAN8187) Ethernet transceiver? Specifically I am trying to use it > > with > > the Atmel AT91SAM9260 microcontroller using MII. I am developing a > > board > > similar to the AT91SAM9260-EK evaluation kit and would like to replace > > the > > Davicom DM9161a. If u-boot currently doesn't work with the LAN8700 can > > anyone provide me with a little guidance as to the magnitude of the > > effort > > to add this transceiver to u-boot? Sorry if my question is a bit naive, > > I > > am a newbie when it comes to u-boot. > Normaly you will have no problem > > the LAN8700 is really simple. > > Best Regards, > J. > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > Kevin, We tested 8700 in MII mode, it works OK. - Recompile u-boot to use MII instead of RMII - Swap the pins PA10, PA11 to PA23,PA24 for TX(2:3) We will be testing that in the kernel(2.6.25) soon, hopefully that will work OK too. Norman ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
