On Thu, May 15, 2008 at 10:33 AM, Steven Woody <[EMAIL PROTECTED]> wrote: > Dear experts, > > With your help, I'v now successfully compiled u-boot-1.3.3-rc3 and got > the `u-boot' boot loader image file. My compiling command line is > `./MAKEALL sbc2410x' since the MPU in my board is a samsung s3c2410A. > But I think the board is not a standard sbc2410x or smdk2410, because > it's NIC chip is a AX88796B. I searched goole, and fond: > http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=80;65;86&PLine=65. > It seems the AX88796B is a Realtek RTL8019 Driver Equivalent. So I > want to know, do I need do anything to make the u-boot working on my > board, and how? > > The same question applies to how to build the kernel. I check all > config files in > /my/eldk-4.1/installation/arm/usr/src//linux-2.6.19.2/arch/arm/configs, > and had not found any work like RTL8019. > > Thanks in advance. >
Maybe I should ask this way for simple: Could I drive a AX88796B NIC with u-boot on a s3c2410 based board? The AX88796B is claimed as rtl8019 equivalent. Thanks in advance. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users