In message <[EMAIL PROTECTED]> you wrote: > > haha! Great minds seem alike. Actually, if no solution, I will try this > method. > Well. As you mentioned, using JTAG we can put bin in any place of flash. > Does it means we should manually set the last-4-bytes? How to determine
Urgh. No, of course not. You just program the "u-boot.bin" image to the last 256 kB of your flash memory, as Stefan already explained. > Last, let me tell you why I cannot use JTAG. The recommend method by u-boot > is using BDI2000. But it is really expensive. I don't have enough money. hehe. > I have tried many home-made wiggler JTAG connectors with OCD commander, but > all failed. Finally I give up for finding low-cost PPC JTAG. Currently > I give the > precompiled bin to some one with special flash writer, and let them burn. You will reconsider buying a BDI3000 when you need a debugger... Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] "Wagner's music is better than it sounds." - Mark Twain ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
