Alexei Babich <[EMAIL PROTECTED]> writes: > I have PXA270 board with embedded by vendor bootleader - "U-Boot 1.3.0". > I define that environment: > --- > $ printenv > baudrate=115200 > bootdelay=3 > bootargs=video=pxafb:mode:800x480-16,active,pixclock:37000,left:100,right:1,hsynclen:10,upper:20,lower:1,vsynclen:10,outputen:1,pixclockpol:0 > root=/dev/sda1 rootdelay=20 console=ttyS0,115200 > bootcmd=cp.b 01e00000 a1000000 13216e
What are you trying to do here? ... > But after power on, I cannot see countdown & run bootcmd. > If I 'run bootcmd' by hand - that works OK. But not automatically after power > on. > Can anybody tell me, how I can solve this ? It seems that support for bootdelay (CONFIG_BOOTDELAY) is not enabled in your vendors version of U-Boot. So to get this feature you will have to compile a new U-Boot. Best regards Markus Klotzbuecher -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
