Hi, I am trying to update the u-boot for the LogicPD/Freescale MPC8360ERDK evaluation board and found some problems with saving the environment configurations to flash.
What I found is that in u-boot 1.3.2 the saveenv command works ok, but since u-boot 1.3.3-rc1 (and I suspect later version) the command does not save the environment variable. from the git-trees, I rolled back /drivers/mtd/cfi_flash.c to the u-boot 1.3.2 version and now the saveenv command seems to work again. I think some change in there (maybe cmd_set_amd_read_jedec_ids, when info->device_id is populated) causes the flash writing mishap. Have anyone else experienced this as well? Any suggestions are also welcome. Thank you, Richard Retanubun **RuggedCom Inc. 30 Whitmore Road, Woodbridge, Ontario, Canada, L4L 7Z4 ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
